From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Thu Sep 14 2000 - 00:24:11 GMT-3
What about :
ipsec-manual Indicates that IKE will not be used to establish the IPSec
security associations for protecting the traffic specified by this crypto
map entry.
I'm trying to get this working -
-----Original Message-----
From: Kevin Baumgartner [mailto:kbaumgar@cisco.com]
Sent: Thursday, September 14, 2000 12:13 PM
To: c_SapirJe@BAM.com
Cc: ccielab@groupstudy.com
Subject: Re: IPsec question
So how are you going to do the key exchange to setup the tunnel
if you don't use isakmp or some other key-exchange method.
That's the problem I have with the CCO document. It keeps isakmp
and IPSEC as seperate documents but you need both for IPSEC to work.
Kevin
>
> Thanks David, but I was looking for one with no isakmp commands. No
> particular reason....CCO just says these commands are optional - I'm
> wondering how this can be done.
> -Jeff
>
> -----Original Message-----
> From: David H. Brown [mailto:DHBrown@PipeLine.com]
> Sent: Wednesday, September 13, 2000 9:45 PM
> To: c_SapirJe@BAM.com; ccielab@groupstudy.com
> Subject: RE: IPsec question
>
>
> Here is a quick scenario I made up today (with configs). It is not
pretty,
> let me know if you have any questions. I will try to make a better
drawing
> and post it in the zip file.
>
> It's attached or: http://www.pipeline.com/~dhbrown/IPSec.zip
>
> David
> (RTP lab 9/18)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> c_SapirJe@BAM.com
> Sent: Wednesday, September 13, 2000 7:35 PM
> To: ccielab@groupstudy.com
> Subject: IPsec question
>
>
> In the docs it says you can configure IPsec without IKE, but there are no
> examples. I tried it and I get the message - warning - no key! by
> following the example in the IPsec configuration section (says it's a
> partial config). I'd like to see a complete but minimalist crypto config.
> Any takers?
> -Jeff
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:55 GMT-3