From: Richard Mott (richpmott@xxxxxxxxxxx)
Date: Mon Sep 11 2000 - 21:21:53 GMT-3
As of PIX IOS 5.1(2) (I haven't tested this yet)
You can now add duplicate route commands with different gateways and
metrics.
Check out the release notes for 5.1(2)
Also the newest 5.2 is supposedly has enhancements to PAT address. You
should be able to define a second PAT address on the same interface with a
different global ID.
Rich Mott
CCIE #5234 (R&S)(ISP Dial)
Internetwork Solutions Engineer
Thrupoint INC
>From: "Maljure, Sanjay" <smaljure@cibernetworks.com>
>Reply-To: "Maljure, Sanjay" <smaljure@cibernetworks.com>
>To: "CCIE (E-mail)" <ccielab@groupstudy.com>
>Subject: PIX question
>Date: Mon, 11 Sep 2000 13:49:30 -0600
>
>
>Sorry this is off the topic, but I thought I will tap in to you guys.
>
>I need to be able to load-balance across two ISPs. I was wondering if there
>is a way we could set two default routes on a PIX and have the PIX
>load-balance outgoing traffic.
>I tried this on a PIX 515 running 4.4(5) and it wouldn't even allow me to
>enter the second 0/0 route. Is PIX capable of any kind of load-balancing at
>all? Per-packet or per-destination??
>All this is an interim step before we do BGP.
>So I really welcome your inputs on this one..
>Thanks
>Sanjay Maljure
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:55 GMT-3