From: John Conzone (jkconzone@xxxxxxxx)
Date: Mon Sep 11 2000 - 19:50:08 GMT-3
Here we go again!
Dave, I was of the same mind as you but numerous folks posted and
said that I was incorrect, and that you can specify the LES/BUS
without the LECS, which I tried.
However it did not work. When I read the command it says it can be
used to override the LECS assignment of the LES/BUS/
I just hope I don't get LANE without a LECS because this is
confusing the hell out of me!
----- Original Message -----
From: Dave McFetridge
To: John Conzone ; ccielab@groupstudy.com
Sent: Monday, September 11, 2000 8:40 AM
Subject: RE: Lane without LECS part......(I lost track)
John,
You realize you must have a LANE configuration server configured.
You would typically configure this on the ATM switch and
clients/routers would learn this via ILMI. If you don't have signaling
and ILMI configured than you'll never find who is the LES for the ELAN
your attempting to be a LEC for. I hope this is clear. Here are some
configs to help, one with a router being the LECS,LES,BUS, and LEC..
and one with the switch as the LECS and the router as the LES,BUS, and
LEC.
Hope this clears things up for you....
Dave McFetridge
Router as LECS/LES/BUS/LEC with static entries......
R1
lane database LANE
name 13 server-atm-address
50.111111111111111111111111.000011110001.01
!
interface ATM0/0
no ip address
no ip directed-broadcast
atm nsap-address 50.111111111111111111111111.000011110000.00
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
no atm ilmi-keepalive
lane config config-atm-address
50.111111111111111111111111.000011110003.00
lane config database LANE
lane global-lecs-address 50.111111111111111111111111.000011110003.00
lane client-atm-address 50.111111111111111111111111.000011110000.01
lane server-atm-address 50.111111111111111111111111.000011110001.01
lane bus-atm-address 50.111111111111111111111111.000011110002.01
!
interface ATM0/0.1 multipoint
ip address 137.20.224.1 255.255.255.0
no ip directed-broadcast
ip ospf network non-broadcast
lane client-atm-address 50.111111111111111111111111.000011110000.01
lane server-atm-address 50.111111111111111111111111.000011110001.01
lane bus-atm-address 50.111111111111111111111111.000011110002.01
lane server-bus ethernet 13
lane client ethernet 13
!
LS1010 as LECS, Router as LES/BUS/LEC.....
LS1010#!
atm lecs-address-default
47.0091.8100.0000.0060.3e5c.1001.0060.3e5c.1005.00 1
atm address 47.0091.8100.0000.0060.3e5c.1001.0060.3e5c.1001.00
!
lane database TEST
name ELAN2 server-atm-address
47.00918100000000603E5C1001.0050732EFA03.02
name ELAN1 server-atm-address
47.00918100000000605CC9BE01.00605CC9BE03.01
!
interface ATM2/0/0
no ip address
atm maxvp-number 0
lane config auto-config-atm-address
lane config database TEST
R2
!
interface ATM0
mtu 1500
no ip address
atm pvc 5 0 5 qsaal
atm pvc 16 0 16 ilmi
!
interface ATM0.1 multipoint
ip address 172.16.100.2 255.255.255.0
lane server-bus ethernet ELAN1
lane client ethernet ELAN1
!
interface ATM0.2 multipoint
ip address 172.16.200.2 255.255.255.0
lane server-bus ethernet ELAN2
lane client ethernet ELAN2
!
-----Original Message-----
From: John Conzone [mailto:jkconzone@home.com]
Sent: Sunday, September 10, 2000 10:15 AM
To: ccielab
Subject: Lane without LECS part......(I lost track)
I've been in the archives and pulled up my old mails and I still
can't get LANE working without buliding a LECS and a LECS database. I
specified the SERVER and BUS addreses and it woudl not work until I
built a LECS.
Does anyone have working configs of 2 routers running LANE without
a LECS so I canuse them this weekend to try again?
Thanks!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:55 GMT-3