From: Tony Medeiros (tonygreat@xxxxxxxx)
Date: Sun Sep 10 2000 - 12:31:57 GMT-3
On R2 use the global command something like this: "Appletalk
permit-partial-zones"
Normally, when you filter a cable range, the zones associated with that
cable range are removed even if the zone exists on other networks. This
command remedies this
Tony
----- Original Message -----
From: "Kenneth Kriel" <ken@flane.com>
To: "'Ccielab" <ccielab@groupstudy.com>
Sent: Sunday, September 10, 2000 6:46 AM
Subject: Apple talk filter
>
> Ladies and Gentleman,
>
> I have the follwing appletalk problem :
>
> Senario
>
> Zone Ether Zone ser0 Zone ser1
> CR 26-26 CR 22-22 CR 24-24
> ----e0--(r1)--s0-----s0--(r2)--s1----s1--(r4)
> |
> e1
> Zone Ether
> CR - 25-25
>
> What do I have to do to see all zones but ONLY CableRange (CR) 25-25 for
> Zone Ether on R4
>
> Can anyone give me an example !
>
> I tried the following :
>
> access-list 641 deny cable-range 205-205
> access-list 641 permit other-access
>
> int s 1 !----On R4 -----
> apple getzonelist-filter 641
>
> AND
>
> int s 1 !----ON R2 -----
> apple zip-reply-filer 641
>
>
>
>
> Help please !
>
> Thank you
>
> Ken
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:54 GMT-3