From: damien (damien@xxxxxxxxxxx)
Date: Fri Sep 08 2000 - 15:01:54 GMT-3
Distribute lists will only work for OSPF on inbound distribute
lists..............link state !
The filter route will only be affected on the Router the distribute list is
configured on..........i.e. if you have a transit router and filter a route
from progressing at the transit router, it will not enter the transit
routers RIB, but it will be forwarded to downstream routers and appear in
there LSDB's.......as well as RIB's.if not filtered again............
----- Original Message -----
From: "David FAHED" <dfahed@outremer.com>
To: "Kotte, Christopher" <Christopher.Kotte@netigy.com>
Cc: "'Kenneth Kriel'" <ken@flane.com>; "'Ccielab" <ccielab@groupstudy.com>
Sent: Friday, September 08, 2000 3:28 PM
Subject: Re: OSPF Filtering
> Don't forget to permit any any after the deny....
>
>
> "Kotte, Christopher" wrote:
>
> > What did your distribute list look like????
> >
> > router ospf xx
> > distribute-list 101 out Serial0
> >
> > access-list 101 deny ip 192.2.2.0 0.0.0.255 any
> >
> > -----Original Message-----
> > From: Kenneth Kriel [mailto:ken@flane.com]
> > Sent: Friday, September 08, 2000 6:42 AM
> > To: 'Ccielab
> > Subject: OSPF Filtering
> >
> > Gentleman,
> >
> > How do I filter a route from coming into OSFP ? I know it might be a
stupid
> > question but I can not get it to work !
> >
> > Layout
> >
> > OSPF Area 1 Area 0
> > 192.2.2.0/24----|
> > |--R1-----R2
> > 135.1.x.0/24----|
> >
> > I do not want to see 192.2.2.0/24 on router R2 !
> >
> > I tried distribute-list out on R1 and in on R2 but no luck !
> >
> > Thank you in advance !
> >
> > Ken
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:54 GMT-3