From: VanTura, Nigel (Nigel.VanTura@xxxxxxxxxxxxx)
Date: Fri Sep 08 2000 - 05:08:13 GMT-3
Hi Jim
I have done what you have done once or twice in the past, but it was with a
3640. I know for a fact that I used xmodem to transfer the image. Due to the
fact that xmodem transmits @ 9600bps you are going to have to change your
console port speed to 115200 as well as your hyperterminal speed for a
faster upload to the router. In ht go to transfer then send file- it will
then propmt you with the location of the image and off you go. On the you
are going to have to pretty much play around and see.
I haven't read up on whether it will work on a 4000, but I think it should.
Regards
Nigel van Tura
SE, Getronics
-----Original Message-----
From: Jim Bond [mailto:trycisco@yahoo.com]
Sent: Wednesday, September 06, 2000 7:53 AM
To: cisco@groupstudy.com
Cc: ccielab@groupstudy.com
Subject: 4000 flash erased, help!
Hello,
I accidentally erased my 4000 router flash and can't
boot up. It didn't recognize my ethernet port so won't
boot from net.
How do I recover the IOS?
Thanks in advance.
Jim
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:54 GMT-3