From: Kenneth Kriel (ken@xxxxxxxxx)
Date: Thu Sep 07 2000 - 10:01:54 GMT-3
Title: atm configuration question
Although you do not need to do the LS1010 config, you could use it as
another ATM end device for testing purposes. Look at the following
link that might help you with this. I know I spent a lot of time on
this because I did not have two ATM routers to play with, I only had
the LS1010 and 1 router, but I could do all the tests !
http://127.0.0.1:8080/cc/td/doc/product/atm/ls1010s/11_1/sw_cg/enet_cn
f.htm
This is on the May 2000 Documentation CD but I am sure you could find
it on any older CD and on the Web !
Have fun, I did ! ;-)
Ken
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Hammond, Doug
Sent: Thursday, September 07, 2000 12:56 AM
To: ccielab@groupstudy.com
Subject: atm configuration question
23 days to go and setting up ATM is really frosting my oats today.
Does anyone have an example of how an LS1010 would be set up to
accommodate the ATM scenarios I may see shortly? I have a LS1010,
cat5k with a LANE board, and a 3640 with an ATM board. Setting up
LANE was relatively easy, but I seem to be stuck on setting up the
LS1010 and rtr to talk CLIP. Any ideas?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:53 GMT-3