From: Matt Lachberg 3 (Cisco@xxxxxxxxxxxxxx)
Date: Thu Sep 07 2000 - 15:06:56 GMT-3
I trying the deny any and log, but I don't see port numbers under the
blocked tcp traffic, am I doing something wrong?:
01:47:41: %SEC-6-IPACCESSLOGDP: list 100 denied icmp 138.7.78.8 ->
138.7.78.8 (0
/0), 1 packet
01:48:05: %SYS-5-CONFIG_I: Configured from console by console
01:49:03: %SEC-6-IPACCESSLOGRP: list 100 denied ospf 138.7.78.7 ->
224.0.0.5, 33
packets
01:50:03: %SEC-6-IPACCESSLOGDP: list 100 denied icmp 138.7.78.7 ->
138.7.78.8 (0
/0), 12 packets
01:50:03: %SEC-6-IPACCESSLOGP: list 100 denied tcp 138.7.78.7(0) ->
138.7.78.8(0
), 8 packets
R8#
Matthew Lachberg, CCNP, CCDP, MCSE
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Earl Aboytes
Sent: Wednesday, September 06, 2000 10:43 PM
To: Frye, Gary; ccielab@groupstudy.com
Subject: RE: well known port numbers
I don't think that you can get to that file during the test. The best thing
to do is the deny all log at the end so that you will notice any traffice
trying to get through your access list.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Earl Aboytes CCIE #6097
Senior Technical Consultant
GTE Managed Solutions
805-381-8817
earl.aboytes@verizon.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Frye,
Gary
Sent: Wednesday, September 06, 2000 11:59 AM
To: 'ccielab@groupstudy.com'
Subject: RE: well known port numbers
A good, overlooked place for well-known port numbers is a file on
WinNT/Win2000 machines. That file is c:\winnt\system32\drivers\etc\services
Likewise, if you have to statically define new port numbers for WinNT
machines, this is the file to do it in.
Gary Frye, Team34 - Network Services
> Phone: (704) 427-0564
> Pager: (800) 504-8567
> Fax: (704) 590-7477
> gary.frye@getronics.com
-----Original Message-----
From: Gary Frye [mailto:gfrye@carolina.rr.com]
Sent: Friday, August 25, 2000 10:13 AM
To: gary.frye@getronics.com
Subject: well known port numbers
Is there a good spot on the doc cd that shows a table of the well known
TCP/UDP port numbers?
Thanks,
Aaron DuShey
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:53 GMT-3