From: Sheref Mohamed (baltaga_2000@xxxxxxxxx)
Date: Thu Sep 07 2000 - 01:18:18 GMT-3
You should not see any OSPF routes for area 0 or 3
becuase they are DIRECTLY CONNECTED INTERFACES !!!!
--- zhuoyun Wu <zywu@yeah.net> wrote:
> I set up ospf routing in router A, router A have
> area 0 and area 3, i can see route of area 3 in
> database of ospf, but i only see route of area 0 in
> route table , Why ?
>
> Router-A#sh ip ospf da
>
> OSPF Router with ID (172.16.10.1) (Process ID
> 1)
>
>
> Router Link States (Area 0)
>
> Link ID ADV Router Age Seq#
> Checksum Link count
> 172.16.10.1 172.16.10.1 1554
> 0x80000034 0xBC97 2
> 172.16.40.1 172.16.40.1 1489
> 0x80000037 0x31C1 2
>
> Net Link States (Area 0)
>
> Link ID ADV Router Age Seq#
> Checksum
> 10.10.1.10 172.16.40.1 1489
> 0x80000006 0xE29F
>
> Summary Net Link States (Area 0)
>
> Link ID ADV Router Age Seq#
> Checksum
> 172.16.50.1 172.16.10.1 1446
> 0x80000002 0xF093
> 172.16.70.0 172.16.10.1 1447
> 0x80000002 0xA090
>
> Router Link States (Area 3)
>
> Link ID ADV Router Age Seq#
> Checksum Link count
> 172.16.10.1 172.16.10.1 1447
> 0x80000035 0x23D9 3
> 172.16.20.1 172.16.20.1 446
> 0x8000002B 0xA8DC 2
> 172.16.30.1 172.16.30.1 1623
> 0x8000000C 0xAAC1 3
>
> Net Link States (Area 3)
>
> Link ID ADV Router Age Seq#
> Checksum
> 172.16.60.1 172.16.20.1 446
> 0x80000007 0x2B8
>
> Summary Net Link States (Area 3)
>
> Link ID ADV Router Age Seq#
> Checksum
> 10.10.0.0 172.16.10.1 1447
> 0x8000002B 0xBF6D
> 172.16.10.1 172.16.10.1 1447
> 0x80000028 0x681D
> 172.16.40.1 172.16.10.1 1447
> 0x80000002 0xCDB5
> Router-A#sh ip route
> Codes: C - connected, S - static, I - IGRP, R - RIP,
> M - mobile, B - BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA
> - OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF
> NSSA external type 2
> E1 - OSPF external type 1, E2 - OSPF external
> type 2, E - EGP
> i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS
> level-2, * - candidate default
> U - per-user static route, o - ODR
>
> Gateway of last resort is not set
>
> 10.0.0.0/16 is subnetted, 1 subnets
> C 10.10.0.0 is directly connected, Ethernet0
> 172.16.0.0/16 is variably subnetted, 4 subnets,
> 2 masks
> C 172.16.50.0/24 is directly connected,
> Serial0
> O 172.16.40.1/32 [110/11] via 10.10.1.10,
> 00:53:50, Ethernet0
> C 172.16.10.0/24 is directly connected,
> Loopback1
> C 172.16.70.0/24 is directly connected,
> Serial1
>
> Router-A#sh run
> Building configuration...
>
> Current configuration:
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname Router-A
> !
> enable password cisco
> !
> no ip domain-lookup
> ip host RB 2001 172.16.10.1
> ip host RC 2002 172.16.10.1
> !
> interface Loopback1
> ip address 172.16.10.1 255.255.255.0
> !
> interface Ethernet0
> ip address 10.10.11.250 255.255.0.0
> !
> interface Serial0
> ip address 172.16.50.1 255.255.255.0
> !
> interface Serial1
> ip address 172.16.70.1 255.255.255.0
> !
> router ospf 1
> network 10.10.0.0 0.0.255.255 area 0
> network 172.16.10.0 0.0.0.255 area 0
> network 172.16.70.0 0.0.0.255 area 3
> network 172.16.50.0 0.0.0.255 area 3
> !
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:53 GMT-3