Multicast over frame relay

From: Muthu (muthumon@xxxxxxx)
Date: Wed Sep 06 2000 - 21:16:16 GMT-3

• Next message: Muthu: "MLPPP and Snapshot routing"
• Previous message: Richard_Woo@xxxxxxxxxxx: "basic telnet question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi guys,

I am facing a problem for running multicast over frame relay.

I have R1, R3 as spoke routers and R2 as hub router.
I am running a OSPF and reachability is there from every point to all other
points.
R1 and r2's ethernet interfaces are joined in multicast group 225.1.1.1.
and spoke router R3 is my rendezvous point.

I can ping from r2 to R1 ( ie from spoke to hub ) for 225.1.1.1
But I am unable to ping from r3 to other spoke router R1

This what I configured ( only Multicast conf!! )

!
ip multicast-routing
ip pim rp-address <R3 address>
!
R1
int e 0
ip pim sparse mode
ip igmp join group 225.1.1.1

int s 0
ip pim sparse mode
ip pim nbma mode

--------------------------------------

R2
ip multicast routing
ip pim rp-address <R3 address>

int e 0
ip pim sparse mode
ip igmp group 225.1.1.1

int s 0
ip pim sparse mode
ip pim nbma mode

r3
ip multicast routing
ip pim rp-address <R3 address>

int e 0
ip pim sparse mode
int s 0
ip pim sparse mode
ip pim nbma mode

Am I missing some thing here ????

regds
muthu

Am I missing anything ??? Any feedback is appreciated

Thanks Rajeevan

• Next message: Muthu: "MLPPP and Snapshot routing"
• Previous message: Richard_Woo@xxxxxxxxxxx: "basic telnet question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:53 GMT-3