From: Kevin Baumgartner (kbaumgar@xxxxxxxxx)
Date: Wed Sep 06 2000 - 18:49:20 GMT-3
OK I am lost as where this train of thought is going as far as route redistribu
tion.
You still will have routing updates but you want to filter certain routes to av
oid
routing loops.
Kevin
At 05:28 PM 9/6/00 -0400, you wrote:
>After doing all the config do "debug ip routing" and if you see any debug
>outputs periodically that means you are not done yet !!
>
>-Vijay
>-----Original Message-----
>From: Kevin Baumgartner <kbaumgar@cisco.com>
>To: Bhakta, Sanjay <SBhakta@ncs.com>
>Cc: ccielab@groupstudy.com <ccielab@groupstudy.com>
>Date: Wednesday, September 06, 2000 5:01 PM
>Subject: Re: Route Redistribution
>
>
> >Actually cciebootcamp lab 8 does do this.
> >
> > - Kevin
> >
> >
> >At 03:26 PM 9/6/00 -0500, you wrote:
> >>In the LAB, when we are asked to do mutual redistribution, are we supposed
> >>to automatically implement routing loop prevention (i.e. filters)?
>Because,
> >>we usually won't have any loops in the LAB scenario unless we have more
>then
> >>one distribution point. I have been using the cciebootcamp labs and
>their
> >>solutions don't implement filters to prevent routing loops.
> >>
> >>Sanjay Bhakta (RTP 9/24)
> >>sbhakta@charter.net
> >>sanjaybhakta@hotmail.com
> >>
> >>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:53 GMT-3