From: Sam Munzani (sam@xxxxxxxxxxx)
Date: Wed Sep 06 2000 - 11:06:53 GMT-3
I thought about it when I did "default information originate". I just
wanted to confirm if there was any other way that I don't know. I am
doing OSPF--> IGRP distribution only.
Thanks a lot for your suggestions,
Sam
----- Original Message -----
From: alan
To: Sam Munzani
Sent: Wednesday, September 06, 2000 4:50 AM
Subject: RE: OSPF to IGRP with different mask redistribution. I
already checked archives and this is what I found.
You may use a ip default-network command associate with OSPF
redistribute static subnet to get this problem solved. A candidate
route must also be seen at the IGRP routing AS . The OSPF classful
routing of the class B network must also redistribute into the OSPF
network so that the OSPF network will know how to reach the IGRP
network.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Sam Munzani
Sent: Wednesday, September 06, 2000 10:12 AM
To: earl@linkline.com
Cc: ccielab@groupstudy.com
Subject: OSPF to IGRP with different mask redistribution. I already
checked archives and this is what I found.
Hi Group,
This is what I found from Archives. Does anybody have command syntex
to do this? I have exactly same situation and would like to know how
to achieve this without using any static routes.
Thanks,
Sam Munzani
4 days to Lab.
RE: OSPF to IGRP redistribution
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:52 GMT-3