From: Erick B. (erickbe@xxxxxxxxx)
Date: Mon Sep 04 2000 - 00:04:03 GMT-3
Hi,
I've been doing snapshot routing, and I have it
working and it is working correctly from debugs. The
only question I have is my RIP routes age from my
client router like normal (they are not frozen). RIP
routes are exchanged in the active time, and no RIP
routes are sent/received over the ISDN in quiet or
post-active state. The RIP routes are in table for a
short while after the active time has ended and then
age out normally. Once the quiet time expires, it
kicks in again.
So, why aren't the routes being frozen like the
documentation saids or am I missing something?
TIA... E
Client router:
interface BRI1/0
ip address 30.30.30.30 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer idle-timeout 480
dialer map snapshot 1 name r5 broadcast 1111
dialer map ip 30.30.30.50 name r5 broadcast 1111
dialer hold-queue 20
dialer-group 1
isdn switch-type basic-5ess
snapshot client 5 8 dialer
ppp authentication chap
Server:
interface Dialer10
ip address 30.30.30.50 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer in-band
dialer idle-timeout 480
dialer map snapshot 1 name r3 broadcast 2222
dialer map ip 30.30.30.30 name r3 broadcast 2222
dialer-group 1
snapshot server 5 dialer
ppp authentication chap
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:52 GMT-3