From: Jeffrey Wacaser (jwacaser@xxxxxxxxxxxxx)
Date: Fri Sep 01 2000 - 19:58:11 GMT-3
I found myself questioning whether this was a prank to see how gullible I was a
s
I was trying this, but it worked! I've known there was an issue for some time,
and was struck that someone had an answer other than use a different program.
You can tell I'm a geek in that I'm impressed by this...
Rajeevan Chamackalil wrote:
> Try following steps. It worked for me (which was posted earlier by somebody
> in the list):
> 1.set baudrate to minimum possible value
> 2.reboot the router. ( you will not see anything on the screen )
> 3. bang some keys for about 20 seconds.
> 4.Set hyperterm back to 9600
> 4.close and reopen the hyperterminal. You will see router in rom monitor
> mode.
>
> rajeevan
> -----Original Message-----
> From: aiqun hu [mailto:huaq@hotmail.com]
> Sent: Friday, August 11, 2000 9:21 AM
> To: ccielab@groupstudy.com
> Subject: Break sequence on Windows NT workstation
>
> Anybody knows what is the break sequence on Windows NT 4.0 workstation for
> 2515 router? I tried several combination keys according to Cisco
> documentation ( URL is http://www.cisco.com/warp/customer/701/61.html. But
> no luck. I use Windows NT 4.0 workstation with SP6.
>
> Thanks for any replay.
>
> Rena
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:51 GMT-3