From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Thu Aug 31 2000 - 19:11:33 GMT-3
IGRP.
this is what I have :
int lo0
ip add 47.47.47.47/24
int s1/0
ip add 2.2.2.1
router igrp 1
netw 2.0.0.0
pass s1/0
neigh 2.2.2.2
ip default-network 47.0.0.0
the show ip protocols says :
Routing Protocol is "igrp 1"
Sending updates every 90 seconds, next due in 75 seconds
Invalid after 270 seconds, hold down 0, flushed after 630
Outgoing update filter list for all interfaces is
Incoming update filter list for all interfaces is
Default networks flagged in outgoing updates <------------shouldn't this
do it?
Default networks accepted from incoming updates
IGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
IGRP maximum hopcount 100
IGRP maximum metric variance 1
Redistributing: igrp 1
Neighbor(s):
2.2.2.2
Routing for Networks:
1.0.0.0
2.0.0.0
Passive Interface(s):
Serial1/0
Routing Information Sources:
Gateway Distance Last Update
2.2.2.2 100 00:00:18
Distance: (default is 100)
Why won't my neighbor 2.2.2.2 get the default route?
It's not because of the unicast updates, if I put a more specific ip
default-network statement in it creates a static route which can only be
removed with a reload.
PLEEEASE someone be awake in the southern hemisphere!!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:34 GMT-3