From: Clifton Stewart (cliftonlstewart@xxxxxxxx)
Date: Wed Aug 30 2000 - 17:41:51 GMT-3
Sam,
You are correct in thinking that the d channel is used for signaling. In
fact it tears down the circuit. But according to CCO see the below URL;
it can be done. I seem to be missing something but don't know what. I
have spent alot of hours on getting it work. Wanted to move on to
something else but can't help myself;} This is why this could be useful.
Let's say you have two routers where you are already using both serials,
sure you can connect the aux ports and do Async Routing but if the two
routers are 2503 or 2504 that leaves interfaces unused that could be
used to make a scenerio more complicated. Which it has, to the point
where i can't get it to work! But thanks for your response.
-Cliff
http://www.cisco.com/warp/customer/133/x25_over_isdn.html
Sam Munzani wrote:
>
> I might be wrong on this but so far I know D channel is being used for
> signaling. I mean call setup and tear up. Unless you are using ISDN in
> dedicated mode, you can't use D channel for some other purpose. If I am
> wrong please tell me what am I thinking wrong?
>
> Sam
>
> On Wed, 30 Aug 2000, Clifton Stewart wrote:
>
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:33 GMT-3