From: Aaron DuShey (aaron.dushey@xxxxxxxxxxxxxxxxxxxxx)
Date: Wed Aug 30 2000 - 02:02:41 GMT-3
here's the situation-boot camp lab 9
r2----pvc ---r10----r4
when I use ip ospf net broadcast with r10-the hub as the DR, here's the
result
You will notice r2 shows r4 as the next hop therefore is unable to get there
but when I change to multipoint, this issue is gone-
If I use broadcast in this situation, what do I have to do to get it to
work?
thanks,
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
default
U - per-user static route, o - ODR
Gateway of last resort is 137.20.20.20 to network 0.0.0.0
1.0.0.0/32 is subnetted, 1 subnets
C 1.1.1.1 is directly connected, Loopback3
* 137.20.0.0/24 is subnetted, 1 subnets
C 137.20.20.0 is directly connected, Ethernet0
172.168.0.0/16 is variably subnetted, 3 subnets, 3 masks
O IA 172.168.10.32/28 [110/74] via 150.100.32.10, 00:00:38, Serial0.1
O IA 172.168.64.0/18 [110/74] via 150.100.32.4, 00:00:38, Serial0.1
O IA 172.168.10.65/32 [110/65] via 150.100.32.10, 00:00:38, Serial0.1
150.100.0.0/19 is subnetted, 1 subnets
C 150.100.32.0 is directly connected, Serial0.1
150.200.0.0/20 is subnetted, 1 subnets
C 150.200.16.0 is directly connected, Serial0.2
I 150.150.0.0/16 [100/8976] via 150.200.16.1, 00:00:24, Serial0.2
S* 0.0.0.0/0 [1/0] via 137.20.20.20
Aaron DuShey-
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:32 GMT-3