From: Price, Jamie (jprice@xxxxxxxxxxx)
Date: Tue Aug 29 2000 - 18:57:38 GMT-3
Title: RE: Dialer Load-threshold
My stab at it would be...
23 B channels outbound on a PRI (or the multi BRI rotary group), a hub
if you will, to multiple remote sites with BRI's (2 B channels), the
spokes. Don't use "dialer load-threshold" at the PRI/hub site because
you may bring up a 3rd B channel to a spoke site. Bad considering the
spoke site can only use 2 B channels (BRI).
-----Original Message-----
From: Kenneth Sacca [mailto:ksacca@cisco.com]
Sent: Tuesday, August 29, 2000 4:42 PM
To: ccielab@groupstudy.com
Subject: Dialer Load-threshold
Hi All,
Can someone clarify what this statement means.
I'm not sure I comprehend what is being said
here.
"When single Multilink BRIs are calling a PRI or
a rotary group with multiple BRIs, do not use
a dialer load-threshold command on the PRI or
multiple BRI rotary group. Use the dialer
load-threshold command on the single BRI
interfaces to prevent attempts to bring up
a third B channel to a single BRI destination."
Thanks Ken
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:32 GMT-3