From: Paul Borghese (pborghese@xxxxxxxxxxxxxx)
Date: Tue Aug 29 2000 - 17:47:37 GMT-3
I do not believe this will work (but it might I am not in front of a router)
area 1 stub
area 1 nssa
Paul
----- Original Message -----
From: "Lawrence Dwyer" <dwyer@tatrc.org>
To: "Paul Borghese" <paul98@prodigy.net>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, August 29, 2000 4:33 PM
Subject: Re: NSSA in OSPF
> Did you define the area as a stub first?
> Larry
>
> Paul Borghese wrote:
>
> > Ok, this is driving me crazy. If I setup a network as an NSSA area
using
> > the command:
> >
> > area 1 nssa
> >
> > a default route does not get propagated by the ABR. If I enter the
> > command -
> >
> > area 1 nssa no-summary
> >
> > a default route does get propagated into the NSSA. But Inter-Area
routes
> > are also propagated into the area. You would think the no-summary
command
> > would operate similar to that of "area 1 stub no-summary" and not allow
IA
> > routes.
> >
> > Plus the no-summary command under nssa is not documented in either the
11.3
> > or 12.1 documentation.
> >
> > Ok, so what is going on? What am I missing?
> >
> > Paul Borghese
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:32 GMT-3