From: Joe Harris (JoeH@xxxxxxxxxxxxxxxxx)
Date: Tue Aug 29 2000 - 17:29:11 GMT-3
Why not try something like,
area 1 nssa default-information-orginate
on the ABR.
-----Original Message-----
From: Paul Borghese [mailto:paul98@prodigy.net]
Sent: Tuesday, August 29, 2000 3:22 PM
To: ccielab@groupstudy.com
Subject: NSSA in OSPF
Ok, this is driving me crazy. If I setup a network as an NSSA area using
the command:
area 1 nssa
a default route does not get propagated by the ABR. If I enter the
command -
area 1 nssa no-summary
a default route does get propagated into the NSSA. But Inter-Area routes
are also propagated into the area. You would think the no-summary command
would operate similar to that of "area 1 stub no-summary" and not allow IA
routes.
Plus the no-summary command under nssa is not documented in either the 11.3
or 12.1 documentation.
Ok, so what is going on? What am I missing?
Paul Borghese
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:32 GMT-3