From: David H. Brown (DHBrown@xxxxxxxxxxxx)
Date: Tue Aug 29 2000 - 17:09:39 GMT-3
Yes, it happens to me regularly with ISDN on 2503s, but I thought it was
just me. I got to the point where I could duplicate it and prevent it from
occurring, you may find this interesting. When I changed my ISDN
interesting traffic Access-list from 110 to 111, it stopped happening. I am
running (C2500-JS56-L), Version 11.2(12), but tried a few other versions to
be sure it wasn't a bug (oh -- uh, feature) in just one version -- seems to
be in many.
access-list 110 deny ip any host 224.0.0.5 log
access-list 110 permit ip any any log
access-list 111 deny ospf any host 224.0.0.5 log
access-list 111 permit ip any any log
It happened to me in the lab, but I didn't let it shake me since I had seen
it so many times in my lab. Give it a try, HTH!
David
(RTP lab 9/18)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Aaron DuShey
Sent: Tuesday, August 29, 2000 12:00 AM
To: CCIE (E-mail)
Subject: router explosion
Anyone ever see this happen to your router-? I was using ospf demand
circuit, and boom, exploding router-
can't say I was sad, I needed a break anyways. My brain is sputtering right
now-
=== Flushing messages (00:32:32 UTC Mon Mar 1 1993) ===
Buffered messages:
Virtual-Access1, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed state to
down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed
state t
o down
%ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected from 8358662 r6, call
laste
d 361 seconds
%LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down
%LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
%LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed state to
up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed
state t
o up
%ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 8358662 r6
%LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed state to
down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed
state t
o down
%ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected from 8358662 r6, call
laste
d 121 seconds
%LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down
BRI0/0: Dialing cause ip (s=10.200.1.2, d=10.6.1.1)
BRI0/0: No dialer string, dialing cannot occur
BRI0/0: Dialing cause ip (s=10.200.1.2, d=10.6.1.1)
BRI0/0: No dialer string, dialing cannot occur
BRI0/0: Dialing cause ip (s=10.200.1.2, d=10.6.1.1)
BRI0/0: No dialer string, dialing cannot occur
%SYS-5-CONFIG_I: Configured from console by console
BRI0/0: Dialing cause ip (s=10.200.1.2, d=10.6.1.1)
BRI0/0: Attempting to dial 8358662
%LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
%LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed state to
up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed
state t
o up
%ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 8358662 r6
BRI0/0: ipx (s=60005.0005.0005.0005, d=60005.ffff.ffff.ffff), 40 bytes,
unintere
sting (set by snapshot)
BRI0/0: sending broadcast to ipx 60005.0006.0006.0006
BRI0/0: snapshot, 2 bytes, interesting (set by snapshot)
BRI0/0: cdp, 293 bytes, uninteresting (no list matched)
BRI0/0: sending broadcast to ip 10.200.1.1
BRI0/0: ip (s=10.200.1.2, d=224.0.0.5), 64 bytes, interesting (ip PERMIT)
BRI0/0: sending broadcast to ip 10.200.1.1
BRI0/0: ip (s=10.200.1.2, d=224.0.0.5), 52 bytes, interesting (ip PERMIT)
BRI0/0: sending broadcast to ip 10.200.1.1
BRI0/0: ip (s=10.200.1.2, d=224.0.0.5), 92 bytes, interesting (ip PERMIT)
BRI0/0: sending broadcast to ip 10.200.1.1
BRI0/0: ip (s=10.200.1.2, d=224.0.0.5), 56 bytes, interesting (ip PERMIT)
BRI0/0: sending broadcast to ip 10.200.1.1
BRI0/0: ip (s=10.200.1.2, d=224.0.0.5), 52 bytes, interesting (ip PERMIT)
BRI0/0: sending broadcast to ip 10.200.1.1
BRI0/0: ip (s=10.200.1.2, d=224.0.0.5), 96 bytes, interesting (ip PERMIT)
BRI0/0: sending broadcast to ip 10.200.1.1
BRI0/0: ip (s=10.200.1.2, d=224.0.0.5), 108 bytes, interesting (ip PERMIT)
BRI0/0: sending broadcast to ip 10.200.1.1
BRI0/0: ip (s=10.200.1.2, d=224.0.0.5), 64 bytes, interesting (ip PERMIT)
BRI0/0: sending broadcast to ip 10.200.1.1
BRI0/0: ip (s=10.200.1.2, d=224.0.0.5), 108 bytes, interesting (ip PERMIT)
BRI0/0: sending broadcast to ip 10.200.1.1
BRI0/0: ip (s=10.200.1.2, d=224.0.0.5), 64 bytes, interesting (ip PERMIT)
BRI0/0: sending broadcast to ip 10.200.1.1
%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback10, changed state to
up
BRI0/0: ipx (s=60005.0005.0005.0005, d=60005.ffff.ffff.ffff), 40 bytes,
unintere
sting (set by snapshot)
BRI0/0: sending broadcast to ipx 60005.0006.0006.0006
%SYS-5-CONFIG_I: Configured from console by console
BRI0/0: snapshot, 2 bytes, interesting (set by snapshot)
BRI0/0: cdp, 293 bytes, uninteresting (no list matched)
BRI0/0: sending broadcast to ip 10.200.1.1
%SYS-5-CONFIG_I: Configured from console by console
Virtual-Access1: idle timeout
Virtual-Access1: disconnecting call
%LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down
Vi1 VP: Cleaning already proceeding
BR0/0:1 VP: Cleaning already proceeding
BRI0/0:1: disconnecting call
Queued messages:
Virtual-Access1: idle timeout
Virtual-Access1: disconnecting call
%LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down
Vi1 VP: Cleaning already proceeding
BR0/0:1 VP: Cleaning already proceeding
BRI0/0:1: disconnecting call
%ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected from 8358662 r6, call
laste
d 143 seconds
No fault history 0xFFFFFFFF. Need 11.1 (2) or higher ROM
*** System received a Bus Error exception ***
signal= 0xa, code= 0x10, context= 0x60ecf7e0
PC = 0x6020386c, Cause = 0x420, Status Reg = 0x34018002
System Bootstrap, Version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFTWARE
(fc1)
Copyright (c) 1998 by cisco Systems, Inc.
C3600 processor with 32768 Kbytes of main memory
Main memory is configured to 32 bit mode with parity disable
Aaron DuShey
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:32 GMT-3