From: Brian Edwards (bedwards@xxxxxxxxxxx)
Date: Tue Aug 29 2000 - 15:20:38 GMT-3
Joe,
I checked out the web page and it shows that you still need a floating
static to the "watched" prefix.
ip route 10.0.0.0 255.0.0.0 BRI0 150 <----route to
remote "floating static route"
Any way around this? Maybe a sceondary IP address of 10.255.255.254/8 on
bri0 (but you can't float a connected). Maybe a RIP and SNAPshot routing to
advertise the 10/8 over the BRI?
/Brian
-----Original Message-----
From: Joe Harris [mailto:JoeH@globaldatasys.com]
Sent: Tuesday, August 29, 2000 10:18 AM
To: spope@cablespeed.com
Cc: ccielab@groupstudy.com
Subject: RE: Understanding ISDN Dial Backup
Use a "dialer watch-list", but it can only be used with eigrp.
http://www.cisco.com/warp/public/793/access_dial/backupwatch.html
-Joe H
-----Original Message-----
From: spope@cablespeed.com [mailto:spope@cablespeed.com]
Sent: Tuesday, August 29, 2000 12:03 PM
To: CCIE (E-mail)
Subject: Understanding ISDN Dial Backup
1. Dialer Profiles w/ backup interface
2. Backup interface
3. Floating static routes
I keep reading that you can't use static routes which leaves me with two
other options. And I read you can't use backup interfaces What else is
there besides dynamic routing??
Thanks for any input.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:32 GMT-3