From: Earl Aboytes (earl@xxxxxxxxxxxx)
Date: Tue Aug 29 2000 - 03:58:06 GMT-3
By default split horizon is disabled on the physical interface of a frame
relay interface. Since this is a non-multipoint configuration for this
interface you do not want routes to be advertised back out to R1. You have
to enable ip split horizon.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Earl Aboytes CCIE #6097
Senior Technical Consultant
GTE Managed Solutions
805-381-8817
earl.aboytes@verizon.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Derek
Buelna
Sent: Monday, August 28, 2000 11:35 PM
To: ccielab@groupstudy.com
Subject: bootcamp lab 2
Hi,
On lab 2, my configs match Marcs very closely. However, I'm trying to figure
out why the ip split horizon on R2's serial interface is there.
I don't know why I would want R2 to advertise routes that it has learned
through serial 0 back out serial 0.
I think I've got (probably don't though) everything working but I don't have
that configured. My routing tables seem to be correct. I must be missing
something.
Hmm..
-Derek
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:32 GMT-3