From: Alan Simpkins (alan_simpkins@xxxxxxxxx)
Date: Mon Aug 28 2000 - 13:21:49 GMT-3
Actually a LECS is an optional component of LANE, only
the LES/BUS, and Client are required. The LECS
function is to provide NSAP of Lane components, not
necessary if hardcoded in client.
--- John Conzone <jkconzone@home.com> wrote:
> Kenny, I guess we can go back and forth, but if
> you try to implememt
> LANE without a LECS, it won't work. Its in the RFC
> as well.
> Try it. Good luck.
> ----- Original Message -----
> From: "Kenny Sallee" <mischa@worldshare.net>
> To: "John Conzone" <jkconzone@home.com>; "Brian
> Best"
> <bbest@bellatlantic.net>; "'Matt Lachberg 3'"
> <Cisco@datastreet.com>; "CCIE
> Lab List (E-mail)" <ccielab@groupstudy.com>
> Sent: Saturday, August 26, 2000 6:05 PM
> Subject: Re: static lane question
>
>
> > Unfortunatly this is a working config from a
> previous position so I can't
> > get in the router for any other config stuff. But
> I remember that the
> > LES/BUS was on a Bay Networks ATM switch. And
> it's definatly LANE!! The
> > Bay switches had ethernet hosts plugged into them
> and an ATM blade for
> > connectivity between ATM switches and ATM
> interface on the router.
> >
> > Also per cisco from the command reference guides:
> >
> > lane bus-atm-address
> > To specify an ATM address---and thus override the
> automatic ATM address
> > assignment---for the broadcast-and-unknown server
> on the specified
> > subinterface, use the lane bus-atm-address
> interface configuration
> command.
> > To remove the ATM address previously specified for
> the
> broadcast-and-unknown
> > server on the specified subinterface and thus
> revert to the automatic
> > address assignment, use the no form of this
> command.
> >
> > lane bus-atm-address atm-address-template
> > no lane bus-atm-address [atm-address-template]
> >
> > And:
> >
> > lane server-atm-address
> > To specify an ATM address---and thus override the
> automatic ATM address
> > assignment---for the LANE server on the specified
> subinterface, use the
> lane
> > server-atm-address interface configuration
> command. To remove the ATM
> > address previously specified for the LANE server
> on the specified
> > subinterface and thus revert to the automatic
> address assignment, use the
> no
> > form of this command.
> >
> > lane server-atm-address atm-address-template
> > no server-atm-address [atm-address-template]
> >
> >
> > From:
> >
> >
>
http://127.0.0.1:8080/cc/td/doc/product/software/ios120/12cgcr/switch_r/xrla
> > ne.htm#xtocid2550738
> >
> > Please someone prove me wrong. This is a concept
> I thought was well
> known.
> > The LECS only purpose is to supply the LEC with
> the LES. If you manually
> > set the LES for an LEC, you no longer need the
> LECS.....
> >
> > Kenny
> >
> >
> >
> > ----- Original Message -----
> > From: "John Conzone" <jkconzone@home.com>
> > To: "Kenny Sallee" <mischa@worldshare.net>; "Brian
> Best"
> > <bbest@bellatlantic.net>; "'Matt Lachberg 3'"
> <Cisco@datastreet.com>;
> "CCIE
> > Lab List (E-mail)" <ccielab@groupstudy.com>
> > Sent: Saturday, August 26, 2000 12:15 PM
> > Subject: Re: static lane question
> >
> >
> > > Kenny, where do you have the ELANs defined?
> Have you tried putting
> > > other devices in your network in the same ELAN?
> How do they find the
> > LES/BUS
> > > for your three ELANS?LANE requires a LECS to
> operate.
> > > I'm not sure what is working on your router,
> but if its LANE, then
> you
> > > have got my attention!
> > >
> > >
> > > As per Cisco:
> > >
> > >
> > > LANE configuration server
> > >
> > > The LANE configuration server contains the
> database that determines
> which
> > > emulated LAN a device belongs to (each
> configuration server can have a
> > > different named database). Each LANE client
> consults the LANE
> > configuration
> > > server just once, when it joins an emulated LAN,
> to determine which
> > emulated
> > > LAN it should join. The LANE configuration
> server returns the ATM
> address
> > of
> > > the LANE server for that emulated LAN.
> > >
> > > One LANE configuration server is required per
> LANE ATM switch cloud.
> > >
> > > ----- Original Message -----
> > > From: "Kenny Sallee" <mischa@worldshare.net>
> > > To: "Brian Best" <bbest@bellatlantic.net>;
> "'Matt Lachberg 3'"
> > > <Cisco@datastreet.com>; "CCIE Lab List (E-mail)"
> <ccielab@groupstudy.com>
> > > Sent: Saturday, August 26, 2000 3:06 PM
> > > Subject: Re: static lane question
> > >
> > >
> > > > I disagree. Unless I'm totally missing
> something, if you manually
> > specify
> > > > the LES/BUS ( hard code them ) you don't need
> a LECS address. Here's
> a
> > > > working config off a 7507 router with an ATM
> card:
> > > >
> > > > interface ATM4/0/0
> > > > no ip address
> > > > no ip directed-broadcast
> > > > ip split-horizon
> > > > atm pvc 1 0 5 qsaal
> > > > atm pvc 2 0 16 ilmi
> > > > hold-queue 100 in
> > > > !
> > > > interface ATM4/0/0.140 multipoint
> > > > ip address 192.168.1.106 255.255.255.248
> > > > ip access-group 140 in
> > > > no ip mroute-cache
> > > > lane server-atm-address <nsap>
> > > > lane bus-atm-address <nsap>
> > > > lane client ethernet spud
> > > > !
> > > > interface ATM4/0/0.198 multipoint
> > > > description Net Ops Users
> > > > ip address 192.168.2.1 255.255.255.0
> > > > ip access-group 198 in
> > > > ip access-group 195 out
> > > > no ip mroute-cache
> > > > lane server-atm-address <nsap>
> > > > lane bus-atm-address <nsap>
> > > > lane client ethernet meister
> > > > !
> > > > interface ATM4/0/0.206 multipoint
> > > > description Sys Admin Users
> > > > ip address 192.168.0.193 255.255.255.240
> > > > ip access-group 196 in
> > > > no ip directed-broadcast
> > > > no ip mroute-cache
> > > > lane server-atm-address <nsap>
> > > > lane bus-atm-address <nsap>
> > > > lane client ethernet thisworks!
> > > >
> > > >
> > > > I changed the IPs and elan names.....Please
> let me know what I'm
> missing
> > > >
> > > > Kenny
> > > >
> > > >
> > > > ----- Original Message -----
>
=== message truncated ===
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:31 GMT-3