From: Kenneth Sacca (ksacca@xxxxxxxxx)
Date: Wed Aug 23 2000 - 13:20:02 GMT-3
Looks fine. I use the following config for low speed links
that have Link Fragmentation and Interleaving.
router1
!
dial-peer voice 5 voip
destination-pattern 1333
session target ipv4:131.180.60.10
dtmf-relay cisco-rtp
ip precedence 5
!
dial-peer voice 1 pots
destination-pattern 1222
port 3/1/0
router2
!
dial-peer voice 5 voip
destination-pattern 1222
session target ipv4:131.180.80.10
dtmf-relay cisco-rtp
ip precedence 5
!
dial-peer voice 1 pots
destination-pattern 1333
port 2/1/0
Regards
Ken Sacca
Cisco Systems
IOS Wan Development
> Kenny Sallee wrote:
>
> Does anyone else see a problem with this config? It's on the DOC CD
> http://127.0.0.1:8080/cc/td/doc/product/software/ios120/12cgcr/voice_c/vcprt1
/vcvoip.htm#xtocid1011341
>
>
>
> Configuration for Router SJ
> ! Configure pots dial peer 1
> dial-peer voice 1 pots
> destination-pattern +14085554000
> port 1/0/0
>
> ! Configure voip dial peer 2
> dial-peer voice 2 voip
> destination-pattern 9...........
> session target ipv4:172.16.65.182
>
> ! Configure the serial interface
> interface serial 0/0
> clock rate 2000000
> ip address 172.16.1.123
> no shutdown
>
>
>
>
> Configuration for Router SLC
> ! Configure pots dial peer 1
> dial-peer voice 1 pots
> destination-pattern 9...........
> port 1/0/0
>
> ! Configure voip dial peer 2
> dial-peer voice 2 voip
> destination-pattern +14085554000
> session target ipv4:172.16.1.123
>
> ! Configure serial interface
> interface serial 0/0
> ip address 172.16.65.182
> no shutdown
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:29 GMT-3