OSPF DEMAND CIRCUIT

From: Burgstaller, Oliver (BurgstallerO@xxxxxxxxxxxxxxxxxxxx)
Date: Wed Aug 23 2000 - 04:25:00 GMT-3

• Next message: SIT Yao Fucheng: "about appltalk rtmp"
• Previous message: Earl Aboytes: "RE: Re LABQ"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hello everyone

again ospf demand circuit

                                 R2(Bri0)
R1(Bri0)------ISDN-------
                            R3(Bri0)

you have to configure on all Bri0 interfaces ip ospf network point to
multipoint then everything works fine.

Why ?? Did not found any deep explanation for point to multipoint interfaces
                                                
Mit freundlichen Gruessen / With kind regards
Dipl.-Ing. O. Burgstaller
Messe Duesseldorf GmbH
Dezentrale Systeme G3-D
Stockumer Kirchstr. 61
D-40474 Duesseldorf
Voice: +49-211-4560-304
Fax: +49-211-4560-87304
e-Mail: BurgstallerO@messe-duesseldorf.de
Visit us on the Web: www.messe-duesseldorf.de
International: www.messe-duesseldorf.com
 <<Burgstaller, Oliver Dirk (E-Mail).vcf>>

   Burgstaller, Oliver Dirk (E-Mail).vcf

• Next message: SIT Yao Fucheng: "about appltalk rtmp"
• Previous message: Earl Aboytes: "RE: Re LABQ"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:29 GMT-3