Re: LSAP & TYPE LIST ACCESS-LIST

From: Varghese Thomas (vnthomas@xxxxxxxxxxx)
Date: Mon Aug 21 2000 - 15:22:59 GMT-3


   
   Hello,
   
   In some example, I saw type list used for appletalk and lsap list used
   for novell and hence the confusion.
   
   Appletalk access filter
   
   access-list 200 permit 0x809b 0x0000
   access-list 200 permit 0x80f3 0x0000
   
   int token ring0
   source-bridge input-type-list 200
   
   Novell access filter
   
   access-list 201 permit 0xe0e0 0x0001
   
   int token ring 0
   source-bridge input-lsap-list 201
   
   Tx n Rd
   
   ----- Original Message -----
   
   From: Simon Baxter
   
   To: Varghese Thomas
   
   Cc: 'Ccielab
   
   Sent: Monday, August 21, 2000 8:52 AM
   
   Subject: RE: LSAP & TYPE LIST ACCESS-LIST
   
   I reckon you should use TYPE codes with routable protocols and LSAPs
   for non-routable.
   
   
   
   ie TYPE for Banyan, ipx, ip, apple - LSAP for netbios, sna, llc
   
   
   
   
   
   
   
      -----Original Message-----
   From: Varghese Thomas [mailto:vnthomas@hotmail.com]
   Sent: Monday, August 21, 2000 10:49 PM
   To: Simon Baxter
   Cc: 'Ccielab
   Subject: Re: LSAP & TYPE LIST ACCESS-LIST
   
   Thanks Simon for the info.
   
   
   
   My question is which access list we should use, if the question is to
   block novell access or Appletalk access.
   
   
   
   Do we need to use respective type code or LSAP codes.
   
   
   
   Pls advise
   
   
   
   Tx n Rd
   
   ----- Original Message -----
   
   From: Simon Baxter
   
   To: Varghese Thomas ; 'Ccielab
   
   Sent: Monday, August 21, 2000 8:05 AM
   
   Subject: RE: LSAP & TYPE LIST ACCESS-LIST
   
   Type is the Ethernet Type Code
   
   
   
   LSAP is the DSAP/SSAP pair in the 802.2 frame
   
   
   
   
   
   have a look at
   
   
   
   http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/3303e/s
   oftware/bctb.htm#xtocid1911516
   
   
   on the Docs CD. Or look on CCO in SRB and Transparent bridging.
   
    -----Original Message-----
   From: Varghese Thomas [mailto:vnthomas@hotmail.com]
   Sent: Monday, August 21, 2000 9:53 PM
   To: 'Ccielab
   Subject: LSAP & TYPE LIST ACCESS-LIST
   
   Hello,
   
   Could somene pls guide me on the difference between input-type-list &
   input-lsap-list.
   
   I found few examples n which they used Type list for blocking few
   protocls(Appletalk) and Lsap list for blocking few protocols(Novell)
   in DLSW.
   
   Tx n RD



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:28 GMT-3