From: Kenneth Kriel (kkriel@xxxxxxxxxxxx)
Date: Sat Aug 19 2000 - 07:59:08 GMT-3
Normally it could be a number of things, particularly with dialer map
statements, if your dialer map on the client side has a number and the core
dialer map does not, then it could me a ppp problem - debug ip packet will
show you a encapsulation failed. Solution: include the name option in your
dialer map on both sides and use ppp chap !
I am assuming of course that your routing and ip addressing is configure
properly.
Ken
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
CHIDI FRANCIS
Sent: Friday, August 18, 2000 5:55 AM
To: ccielab@groupstudy.com
Subject: Re: ISDN issues
Hi guys
I have an isdn problem problem whereby the remote site dialins to the core
router, connectivity was established but there was no traffic flowing
between
the two routers. There was an access list applied but when I removed the
access list still the remote router cannot ping the core router. I did show
isdn stat, layer 1 and 2 looks okay but layer 3 shows o calls. I also looked
at the show dialer, dialed number is correct, there are no failures all
successfull. Any advice on what to look out for or check
thanks members
chidy
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:27 GMT-3