From: Shaun Nicholson (Shaun.Nicholson@xxxxxx)
Date: Fri Aug 18 2000 - 09:32:55 GMT-3
Do you have the word broadcast at the end of your dialer map?
Post your configs for us all to take a look at if that does not help.
Shaun
eejiofor@yahoo.com on 08/18/2000 01:00:00 AM
To: ccielab@groupstudy.com@Internet
cc: (bcc: Shaun Nicholson/MD/KAIPERM)
Subject: Re: ISDN issues
Hi guys
I have an isdn problem problem whereby the remote site dialins to the core
router, connectivity was established but there was no traffic flowing between
the two routers. There was an access list applied but when I removed the
access list still the remote router cannot ping the core router. I did show
isdn stat, layer 1 and 2 looks okay but layer 3 shows o calls. I also looked
at the show dialer, dialed number is correct, there are no failures all
successfull. Any advice on what to look out for or check
thanks members
chidy
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:27 GMT-3