From: Sam Munzani (sam@xxxxxxxxxxx)
Date: Tue Aug 15 2000 - 11:44:42 GMT-3
This will definately work. Not the previous posting which used ipunnumbered.
Sam
> Setup IRB. The frame and ethernet interfaces are in the same bridge group,
> and the BVI is addressed in the subnet.
>
> -----Original Message-----
> From: Brian Edwards <bedwards@juniper.net>
> To: ccielab@groupstudy.com <ccielab@groupstudy.com>
> Date: Monday, August 14, 2000 4:09 PM
> Subject: Free scenario
>
>
> >Here is a decent little scenario (IMHO). If you think it sucks, well you
> get
> >what you pay for. I would like to know how people resolved it (in case
> there
> >are other ways to do this that I didn't think about. Here it is...
> >
> >
> >
> >[R1]------[R2]------[R3]
> >
> >
> >R1-R2 link is Frame Relay
> >R2-R3 is Ethernet
> >All three routers have interfaces on the 10.1.1.0/24 subnet and can ping
> >each other directly on that subnet.
> >Do not use proxy-ARP to solve the problem.
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:26 GMT-3