From: Brian S turner (brian@xxxxxxxxxxxxxxxxx)
Date: Tue Aug 15 2000 - 10:07:36 GMT-3
Well you are kinda Vague about your problem description, but generally if
you have routes not showing up, it is either a syncronization issue or a
next hop issue. A router will not put an IBGP route in its table unless it
has a route to the next hop, and the IBGP route is in its local IGP table
already.
Brian
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Christopher Van Heuveln
Sent: Tuesday, August 15, 2000 7:23 AM
To: David Goldsmith
Cc: Kenneth R. Snell; ccielab@groupstudy.com
Subject: Re: I Need a Rule
Make sure you do:
router bgp #
bgp ?
...and read the description for redistribute-internal. Note the
(dangerous) comment...
On Sat, Aug 12, 2000 at 12:31:57PM -0400, David Goldsmith wrote:
> Ken,
>
> What going on.... Did you do the bgp redistribute-internal...........
Don't
> blow anything up over....
>
> Dave Goldsmith
>
>
>
> "Kenneth R. Snell" wrote:
>
> > I'm trying to redistribute BGP routes into an IGP routing process
(mainly
> > RIP, EIGRP and IGRP). I can see EBGP routes but not IBGP routes. Now, I
can
> > live with that but I need to know why? Anybody got a rule or reference I
can
> > look up? Thanks
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:25 GMT-3