From: Dayong Gan (dgan@xxxxxxxx)
Date: Mon Aug 14 2000 - 16:15:03 GMT-3
hi, Jamie.
access-list 200 permit 0x0000 0x0D0D
This command does not make sense. 0x0000 is the type code? 0x0D0D is
the mask?
It should be "access-list 200 permit 0x0D0D 0x0000" ?
Dayong
-----Original Message-----
From: James Brogdon, Jr. [mailto:jbrogdon@mentortech.com]
Sent: Saturday, August 12, 2000 12:52 AM
To: 'Dayong Gan'
Subject: RE: How to find the Type-Code in Cisco CD?
Dayong,
The NetBIOS LSAPs are:
F0
F1
The SNA LSAPs are:
04
05
08
09
0C
0D
To permit all NetBIOS Traffic use:
access-list 200 permit 0xF0F0 0x0101
To permit all SNA Traffic:
access-list 200 permit 0x0000 0x0D0D
Let me know if this helps.
Thanks,
Jamie Brogdon
Consultant
Mentor Technologies
(443) 621-6734 (cell)
jbrogdon@mentortech.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Dayong Gan
Sent: Friday, August 11, 2000 2:38 PM
To: Ccielab (E-mail)
Subject: How to find the Type-Code in Cisco CD?
Hi, everybody.
How can I find out the type codes when config access-list 200-299?
DLSW Design Guide (cisco) says
to permit NetBIOS not SNA
access-list 200 permit 0x0F0F 0x0101
FatKid ---411 advanced dlsw+ Hint 11---says
SNA (0x0F0F)
Netbios (0x0D0D)
Which one is corect? I can not find a full list of type-code on
cisco cd. Who can help me?
Best regards,
Dayong Gan
Network Engineer
Nuvo Network Management Inc.
260-2650 Queensview Drive, Ottawa. Canada K2B 8H6
Tel:(613)721-6886 ext. 149
Fax:(613)721-1399
Email: dgan@nuvo.com
http://www.nuvo.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:25 GMT-3