From: Alan Simpkins (alan_simpkins@xxxxxxxxx)
Date: Fri Aug 11 2000 - 11:01:37 GMT-3
There really is no reason to do this.
--- Matt Lachberg 3 <Cisco@datastreet.com> wrote:
> I know that the golden rule on NBMA networks is to
> disable split-horizon, I
> know the value on hub / and or multipoint
> interfaces, but can anyone tell me
> why you would want to disable it on the spoke
> routers if your using frame
> point-to-point interfaces on them?
>
>
> Interface Serial0
> no ip address
> encapsulation frame-relay
> !
> interface serial0.1 point-to-point
> ipx network 234
> no ipx split-horizon eigrp 234
> frame-relay interface-dlci 302
> !
> ipx router eigrp 234
> network 234
> !
> ipx router rip
> no network 234
> !
>
>
> Matthew Lachberg, CCNP, CCDP, MSCE
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:24 GMT-3