From: yujianchun (stiff.yu@xxxxxxxxxxxxxxxxxx)
Date: Fri Aug 11 2000 - 02:25:38 GMT-3
you can't do it unless r1 is ABR, then use cable-range
-----Original Message-----
From: Dave Gingrich <Dave@dcg.org>
To: ccielab@groupstudy.com <ccielab@groupstudy.com>
Date: 27 July 2000 19:55
Subject: Changing IPX RIP Hop Count
>
>Is it possible to set or alter an IPX RIP hop count value? IPX RIP will
>not advertise any routes with a hop count > 15, but how can one
>artificially change (lower) the value. There appears to be no mechanism
>allowing this to be set, even when redistributing from IPX EIGRP.
>
>The command ipx maximum-hops allows EIGRP or NLSP to accept routes with a
>hop count > 15, but it doesn't affect RIP.
>
>-Puzzled
>=====================
>Dave Gingrich, K9DC
>Indianapolis, Indiana
>Dave@dcg.org
>=====================
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:24 GMT-3