From: Kenny Sallee (mischa@xxxxxxxxxxxxxx)
Date: Thu Aug 10 2000 - 14:57:56 GMT-3
Nevermind the working configs. I just saw one that was posted earlier
Kenny
----- Original Message -----
From: "Kenny Sallee" <mischa@worldshare.net>
To: "William Swedberg" <swedbergwp@yahoo.com>; "Shaun Nicholson"
<Shaun.Nicholson@kp.org>; "ccielab" <ccielab@groupstudy.com>
Sent: Thursday, August 10, 2000 10:55 AM
Subject: Re: LECS LES/BUS Lane client not connecting
> I agree with William and another post mentioning the elan membership on
the
> subinterface.
>
> Does anyone out there have working "show" commands and working config to
> verify LANE? I don't have ATM and would like to compare working configs.
> Also, I browsed a doc on CCO yesterday that stated the LES/BUS/LECS
address
> will be auto configured to use the nsap +1, nsap+2, and nsap+3
respectivly.
> Where did the a,b,and c come from below??? Is that a side effect of older
> code on the 1010?
>
> Kenny
>
>
> ----- Original Message -----
> From: "William Swedberg" <swedbergwp@yahoo.com>
> To: "Shaun Nicholson" <Shaun.Nicholson@kp.org>; "ccielab"
> <ccielab@groupstudy.com>
> Sent: Thursday, August 10, 2000 8:53 AM
> Subject: Re: LECS LES/BUS Lane client not connecting
>
>
> > In your database config you are pointing at the LECS
> > not the LES. change the entry to read
> >
> > 47.00918100000000613E5B6C01.00605C5DD03A.01
> >
> >
> > not
> >
> > 47.00918100000000613E5B6C01.00605C5DD03C.00
> >
> > That should do it.
> >
> > William Swedberg CCNP CCDP
> >
> > --- Shaun Nicholson <Shaun.Nicholson@kp.org> wrote:
> > > Desperatly need help here.
> > > OK I can't get this to work the LES/BUS appears to
> > > be up as does the LECS on R6 but my lane client will
> > > not connect or my remote router.
> > > Here is the situation and configs and ATM gurus out
> > > there can help. I have checked the archives and
> > > everything appears to be OK.
> > > I know mt LS1010 has old IOS on it but I dont have
> > > enougth memory to upgrade the guy so I can put on a
> > > later release of IOS. Both routers are 4x00 series.
> > >
> > >
> > R6---------------------LS1010------------------------ATM1
> > >
> > > r6#sh ver
> > > Cisco Internetwork Operating System Software
> > > IOS (tm) 4500 Software (C4500-JS-M), Version
> > > 11.2(15a), RELEASE SOFTWARE (fc1)
> > > Copyright (c) 1986-1998 by cisco Systems, Inc.
> > > Compiled Mon 24-Aug-98 01:53 by tmullins
> > > Image text-base: 0x600088A0, data-base: 0x60808000
> > >
> > > ROM: System Bootstrap, Version 5.3(10) [tamb 10],
> > > RELEASE SOFTWARE (fc1)
> > > BOOTFLASH: 4500 Software (C4500-BOOT-M), Version
> > > 11.2(22), RELEASE SOFTWARE (fc1)
> > >
> > > r6 uptime is 14 hours, 30 minutes
> > > System restarted by reload
> > > System image file is
> > > "flash:c4500-js-mz_112-15a.bin", booted via flash
> > >
> > > cisco 4700 (R4K) processor (revision E) with
> > > 32768K/16384K bytes of memory.
> > > Processor board ID 04014875
> > > R4700 processor, Implementation 33, Revision 1.0
> > > (Level 2 Cache)
> > > G.703/E1 software, Version 1.0.
> > > Bridging software.
> > > SuperLAT software copyright 1990 by Meridian
> > > Technology Corp).
> > > X.25 software, Version 2.0, NET2, BFE and GOSIP
> > > compliant.
> > > TN3270 Emulation software.
> > > 2 Ethernet/IEEE 802.3 interface(s)
> > > 1 Token Ring/IEEE 802.5 interface(s)
> > > 1 ATM network interface(s)
> > > 128K bytes of non-volatile configuration memory.
> > > 16384K bytes of processor board System flash
> > > (Read/Write)
> > > 4096K bytes of processor board Boot flash
> > > (Read/Write)
> > >
> > > Configuration register is 0x2102
> > >
> > > LS1010
> > > LS1010#sh ver
> > > Cisco Internetwork Operating System Software
> > > IOS (tm) IISP Software (LS1010-WI-M), Version
> > > 11.1(1), RELEASE SOFTWARE (fc1)
> > > Copyright (c) 1986-1996 by cisco Systems, Inc.
> > > Compiled Tue 14-May-96 14:49 by integ
> > > Image text-base: 0x600108B0, data-base: 0x602DE000
> > >
> > > ROM: System Bootstrap, Version 201(1025), SOFTWARE
> > >
> > > LS1010 uptime is 13 minutes
> > > System restarted by power-on
> > > System image file is "bootflash:ls1010-wi-mz_111-1",
> > > booted via bootflash
> > >
> > > cisco ASP (R4600) processor with 16384K bytes of
> > > memory.
> > > R4600 processor, Implementation 32, Revision 2.0
> > > Last reset from power-on
> > > 1 Ethernet/IEEE 802.3 interface.
> > > 24 ATM network interfaces.
> > > 125K bytes of non-volatile configuration memory.
> > >
> > > 8192K bytes of Flash internal SIMM (Sector size
> > > 256K).
> > > Configuration register is 0x2102
> > >
> > > atm1#sh ver
> > > Cisco Internetwork Operating System Software
> > > IOS (tm) 4500 Software (C4500-JS-M), Version
> > > 11.2(22), RELEASE SOFTWARE (fc1)
> > > Copyright (c) 1986-2000 by cisco Systems, Inc.
> > > Compiled Mon 03-Apr-00 22:30 by htseng
> > > Image text-base: 0x600088A0, data-base: 0x60810000
> > >
> > > ROM: System Bootstrap, Version 5.1(1) [daveu 1],
> > > RELEASE SOFTWARE (fc1)
> > > BOOTFLASH: 4500 Software (C4500-BOOT-M), Version
> > > 11.2(22), RELEASE SOFTWARE (fc1)
> > >
> > > atm1 uptime is 15 hours, 45 minutes
> > > System restarted by reload
> > > System image file is "flash:c4500-js-mz.112-22.bin",
> > > booted via flash
> > >
> > > cisco 4500 (R4K) processor (revision 0x00) with
> > > 32768K/16384K bytes of memory.
> > > Processor board ID 01259057
> > > R4600 processor, Implementation 32, Revision 1.0
> > > G.703/E1 software, Version 1.0.
> > > Bridging software.
> > > SuperLAT software copyright 1990 by Meridian
> > > Technology Corp).
> > > X.25 software, Version 2.0, NET2, BFE and GOSIP
> > > compliant.
> > > TN3270 Emulation software.
> > > 2 Ethernet/IEEE 802.3 interface(s)
> > > 1 ATM network interface(s)
> > > 128K bytes of non-volatile configuration memory.
> > > 8192K bytes of processor board System flash
> > > (Read/Write)
> > > 4096K bytes of processor board Boot flash
> > > (Read/Write)
> > >
> > > Configuration register is 0x2102
> > >
> > > r6#sh lane
> > > LE Config Server ATM0 config table: cat1
> > > Admin: up State: operational
> > > LECS Mastership State: active master
> > > list of global LECS addresses (11 seconds to
> > > update):
> > > 47.00918100000000613E5B6C01.00605C5DD03C.00
> > > <-------- me
> > > ATM Address of this LECS:
> > > 47.00918100000000613E5B6C01.00605C5DD03C.00 (auto)
> > > cumulative total number of unrecognized packets
> > > received so far: 0
> > > cumulative total number of config requests received
> > > so far: 188
> > > cumulative total number of config failures so far: 0
> > >
> > > LE Server ATM0.1 ELAN name: elan1 Admin: up
> > > State: operational
> > > type: ethernet Max Frame Size: 1516
> > > ATM address:
> > > 47.00918100000000613E5B6C01.00605C5DD03A.01
> > > LECS used: UNKNOWN/UNSET NOT yet connected
> > >
> > > LE BUS ATM0.1 ELAN name: elan1 Admin: up State:
> > > operational
> > > type: ethernet Max Frame Size: 1516
> > > ATM address:
> > > 47.00918100000000613E5B6C01.00605C5DD03B.01
> > >
> > > LE Client ATM0.1 ELAN name: elan1 Admin: up
> > > State: initialState
> > > Client ID: unassigned Next join attempt in 0
> > > seconds
> > > Join Attempt: 20
> > > Last Fail Reason: Config VC being released
> > > HW Address: 0060.5c5d.d039 Type: ethernet
> > > Max Frame Size: 1516
> > > ATM Address:
> > > 00.000000000000000000000000.000000000000.00
> > >
> > > VCD rxFrames txFrames Type ATM Address
> > > 0 0 0 configure
> > > 00.000000000000000000000000.000000000000.00
> > > 0 0 0 direct
> > > 00.000000000000000000000000.000000000000.00
> > > 0 0 0 distribute
> > > 00.000000000000000000000000.000000000000.00
> > > 0 0 0 send
> > > 00.000000000000000000000000.000000000000.00
> > > 0 0 0 forward
> > > 00.000000000000000000000000.000000000000.00
> > >
> > > r6#sh lane bus
> > > LE BUS ATM0.1 ELAN name: elan1 Admin: up State:
> > > operational
> > > type: ethernet Max Frame Size: 1516
> > > ATM address:
> > > 47.00918100000000613E5B6C01.00605C5DD03B.01
> > >
> > > r6#sh lane client
> > > LE Client ATM0.1 ELAN name: elan1 Admin: up
> > > State: initialState
> > > Client ID: unassigned Next join attempt in 0
> > > seconds
> > > Join Attempt: 20
> > > Last Fail Reason: Config VC being released
> > > HW Address: 0060.5c5d.d039 Type: ethernet
> > > Max Frame Size: 1516
> > > ATM Address:
> > > 00.000000000000000000000000.000000000000.00
> > >
> > > VCD rxFrames txFrames Type ATM Address
> > > 0 0 0 configure
> > > 00.000000000000000000000000.000000000000.00
> > > 0 0 0 direct
> > > 00.000000000000000000000000.000000000000.00
> > > 0 0 0 distribute
> > > 00.000000000000000000000000.000000000000.00
> > > 0 0 0 send
> > > 00.000000000000000000000000.000000000000.00
> > >
> > === message truncated ===
> >
> >
> > =====
> > William Swedberg CCNP CCDP
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:23 GMT-3