From: Shaun Nicholson (Shaun.Nicholson@xxxxxx)
Date: Thu Aug 10 2000 - 11:11:30 GMT-3
No I had already tried that and have tried it again I removed the elan1 section
to try to get it to connect I have reapplied it with out success any other Ide
as.
r6#sh lane clie
LE Client ATM0.1 ELAN name: elan1 Admin: up State: initialState
Client ID: unassigned Next join attempt in 5 seconds
Join Attempt: 4
Last Fail Reason: Control Direct VC being released
HW Address: 0060.5c5d.d039 Type: ethernet Max Frame Size: 1516
ATM Address: 47.00918100000000613E5B6C01.00605C5DD039.01
VCD rxFrames txFrames Type ATM Address
0 0 0 configure 47.00918100000000613E5B6C01.00605C5DD03C.0
0
0 0 0 direct 47.00918100000000613E5B6C01.00605C5DD03C.0
1
0 0 0 distribute 00.000000000000000000000000.000000000000.0
0
0 0 0 send 00.000000000000000000000000.000000000000.0
0
0 0 0 forward 00.000000000000000000000000.000000000000.0
0
I had removed the LS1010 default atm lecs address but this is still not working
after readding it this is what I get from a sh lane client.
Any more Ideas guys I need to get this working and I'm all out
Shaun
dbeynon@hotmail.com on 08/10/2000 10:02:00 AM
To: Shaun Nicholson, ccielab@groupstudy.com@Internet
cc:
Subject: Re: LECS LES/BUS Lane client not connecting
On R^ you have not defined the ELAN1 membership for the
LEC:
nterface ATM0.1 multipoint
ip address 195.5.6.6 255.255.255.0
ip ospf network broadcast
lane server-bus ethernet elan1
lane client ethernet
no cdp enable
In above the lane client should read
lane client ethernet elan1
I think this should correct your problem
Dan
>From: Shaun Nicholson <Shaun.Nicholson@kp.org>
>Reply-To: Shaun Nicholson <Shaun.Nicholson@kp.org>
>To: ccielab <ccielab@groupstudy.com>
>Subject: LECS LES/BUS Lane client not connecting
>Date: 10 Aug 2000 06:05:12 -0700
>
>Desperatly need help here.
>OK I can't get this to work the LES/BUS appears to be up as does the LECS
>on R6 but my lane client will not connect or my remote router.
>Here is the situation and configs and ATM gurus out there can help. I have
>checked the archives and everything appears to be OK.
>I know mt LS1010 has old IOS on it but I dont have enougth memory to
>upgrade the guy so I can put on a later release of IOS. Both routers are
>4x00 series.
>
>R6---------------------LS1010------------------------ATM1
>
>r6#sh ver
>Cisco Internetwork Operating System Software
>IOS (tm) 4500 Software (C4500-JS-M), Version 11.2(15a), RELEASE SOFTWARE
>(fc1)
>Copyright (c) 1986-1998 by cisco Systems, Inc.
>Compiled Mon 24-Aug-98 01:53 by tmullins
>Image text-base: 0x600088A0, data-base: 0x60808000
>
>ROM: System Bootstrap, Version 5.3(10) [tamb 10], RELEASE SOFTWARE (fc1)
>BOOTFLASH: 4500 Software (C4500-BOOT-M), Version 11.2(22), RELEASE SOFTWARE
>(fc1)
>
>r6 uptime is 14 hours, 30 minutes
>System restarted by reload
>System image file is "flash:c4500-js-mz_112-15a.bin", booted via flash
>
>cisco 4700 (R4K) processor (revision E) with 32768K/16384K bytes of memory.
>Processor board ID 04014875
>R4700 processor, Implementation 33, Revision 1.0 (Level 2 Cache)
>G.703/E1 software, Version 1.0.
>Bridging software.
>SuperLAT software copyright 1990 by Meridian Technology Corp).
>X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
>TN3270 Emulation software.
>2 Ethernet/IEEE 802.3 interface(s)
>1 Token Ring/IEEE 802.5 interface(s)
>1 ATM network interface(s)
>128K bytes of non-volatile configuration memory.
>16384K bytes of processor board System flash (Read/Write)
>4096K bytes of processor board Boot flash (Read/Write)
>
>Configuration register is 0x2102
>
>LS1010
>LS1010#sh ver
>Cisco Internetwork Operating System Software
>IOS (tm) IISP Software (LS1010-WI-M), Version 11.1(1), RELEASE SOFTWARE
>(fc1)
>Copyright (c) 1986-1996 by cisco Systems, Inc.
>Compiled Tue 14-May-96 14:49 by integ
>Image text-base: 0x600108B0, data-base: 0x602DE000
>
>ROM: System Bootstrap, Version 201(1025), SOFTWARE
>
>LS1010 uptime is 13 minutes
>System restarted by power-on
>System image file is "bootflash:ls1010-wi-mz_111-1", booted via bootflash
>
>cisco ASP (R4600) processor with 16384K bytes of memory.
>R4600 processor, Implementation 32, Revision 2.0
>Last reset from power-on
>1 Ethernet/IEEE 802.3 interface.
>24 ATM network interfaces.
>125K bytes of non-volatile configuration memory.
>
>8192K bytes of Flash internal SIMM (Sector size 256K).
>Configuration register is 0x2102
>
>atm1#sh ver
>Cisco Internetwork Operating System Software
>IOS (tm) 4500 Software (C4500-JS-M), Version 11.2(22), RELEASE SOFTWARE
>(fc1)
>Copyright (c) 1986-2000 by cisco Systems, Inc.
>Compiled Mon 03-Apr-00 22:30 by htseng
>Image text-base: 0x600088A0, data-base: 0x60810000
>
>ROM: System Bootstrap, Version 5.1(1) [daveu 1], RELEASE SOFTWARE (fc1)
>BOOTFLASH: 4500 Software (C4500-BOOT-M), Version 11.2(22), RELEASE SOFTWARE
>(fc1)
>
>atm1 uptime is 15 hours, 45 minutes
>System restarted by reload
>System image file is "flash:c4500-js-mz.112-22.bin", booted via flash
>
>cisco 4500 (R4K) processor (revision 0x00) with 32768K/16384K bytes of
>memory.
>Processor board ID 01259057
>R4600 processor, Implementation 32, Revision 1.0
>G.703/E1 software, Version 1.0.
>Bridging software.
>SuperLAT software copyright 1990 by Meridian Technology Corp).
>X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
>TN3270 Emulation software.
>2 Ethernet/IEEE 802.3 interface(s)
>1 ATM network interface(s)
>128K bytes of non-volatile configuration memory.
>8192K bytes of processor board System flash (Read/Write)
>4096K bytes of processor board Boot flash (Read/Write)
>
>Configuration register is 0x2102
>
>r6#sh lane
>LE Config Server ATM0 config table: cat1
>Admin: up State: operational
>LECS Mastership State: active master
>list of global LECS addresses (11 seconds to update):
>47.00918100000000613E5B6C01.00605C5DD03C.00 <-------- me
>ATM Address of this LECS: 47.00918100000000613E5B6C01.00605C5DD03C.00
>(auto)
>cumulative total number of unrecognized packets received so far: 0
>cumulative total number of config requests received so far: 188
>cumulative total number of config failures so far: 0
>
>LE Server ATM0.1 ELAN name: elan1 Admin: up State: operational
>type: ethernet Max Frame Size: 1516
>ATM address: 47.00918100000000613E5B6C01.00605C5DD03A.01
>LECS used: UNKNOWN/UNSET NOT yet connected
>
>LE BUS ATM0.1 ELAN name: elan1 Admin: up State: operational
>type: ethernet Max Frame Size: 1516
>ATM address: 47.00918100000000613E5B6C01.00605C5DD03B.01
>
>LE Client ATM0.1 ELAN name: elan1 Admin: up State: initialState
>Client ID: unassigned Next join attempt in 0 seconds
>Join Attempt: 20
>Last Fail Reason: Config VC being released
>HW Address: 0060.5c5d.d039 Type: ethernet Max Frame Size:
>1516
>ATM Address: 00.000000000000000000000000.000000000000.00
>
> VCD rxFrames txFrames Type ATM Address
> 0 0 0 configure
>00.000000000000000000000000.000000000000.00
> 0 0 0 direct
>00.000000000000000000000000.000000000000.00
> 0 0 0 distribute
>00.000000000000000000000000.000000000000.00
> 0 0 0 send
>00.000000000000000000000000.000000000000.00
> 0 0 0 forward
>00.000000000000000000000000.000000000000.00
>
>r6#sh lane bus
>LE BUS ATM0.1 ELAN name: elan1 Admin: up State: operational
>type: ethernet Max Frame Size: 1516
>ATM address: 47.00918100000000613E5B6C01.00605C5DD03B.01
>
>r6#sh lane client
>LE Client ATM0.1 ELAN name: elan1 Admin: up State: initialState
>Client ID: unassigned Next join attempt in 0 seconds
>Join Attempt: 20
>Last Fail Reason: Config VC being released
>HW Address: 0060.5c5d.d039 Type: ethernet Max Frame Size:
>1516
>ATM Address: 00.000000000000000000000000.000000000000.00
>
> VCD rxFrames txFrames Type ATM Address
> 0 0 0 configure
>00.000000000000000000000000.000000000000.00
> 0 0 0 direct
>00.000000000000000000000000.000000000000.00
> 0 0 0 distribute
>00.000000000000000000000000.000000000000.00
> 0 0 0 send
>00.000000000000000000000000.000000000000.00
> 0 0 0 forward
>00.000000000000000000000000.000000000000.00
>
>r6#sh lane conf
>LE Config Server ATM0 config table: cat1
>Admin: up State: operational
>LECS Mastership State: active master
>list of global LECS addresses (30 seconds to update):
>47.00918100000000613E5B6C01.00605C5DD03C.00 <-------- me
>ATM Address of this LECS: 47.00918100000000613E5B6C01.00605C5DD03C.00
>(auto)
>cumulative total number of unrecognized packets received so far: 0
>cumulative total number of config requests received so far: 188
>cumulative total number of config failures so far: 0
>
>r6#sh lane data
>
>LANE Config Server database table 'cat1' bound to interface/s: ATM0
>default elan: elan1
>elan 'elan1': un-restricted
> server 47.00918100000000613E5B6C01.00605C5DD03C.01 (prio 0)
>
>r6#sh lane def
>interface ATM0:
>LANE Client: 47.00918100000000613E5B6C01.00605C5DD039.**
>LANE Server: 47.00918100000000613E5B6C01.00605C5DD03A.**
>LANE Bus: 47.00918100000000613E5B6C01.00605C5DD03B.**
>LANE Config Server: 47.00918100000000613E5B6C01.00605C5DD03C.00
>note: ** is the subinterface number byte in hex
>r6#sh run
>Building configuration...
>
>Current configuration:
>!
>version 11.2
>no service password-encryption
>no service udp-small-servers
>no service tcp-small-servers
>!
>hostname r6
>!
>!
>!
>lane database cat1
> name elan1 server-atm-address
>47.00918100000000613E5B6C01.00605C5DD03C.01
> default-name elan1
>!
>interface Loopback0
> ip address 135.5.6.6 255.255.255.0
>!
>interface Ethernet0
> ip address 135.5.30.1 255.255.255.0
>!
>interface Ethernet1
> no ip address
> shutdown
>!
>interface TokenRing0
> ip address 135.5.32.1 255.255.255.0
> ring-speed 16
>!
>interface ATM0
> no ip address
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> lane config auto-config-atm-address
> lane config database cat1
>!
>interface ATM0.1 multipoint
> ip address 195.5.6.6 255.255.255.0
> ip ospf network broadcast
> lane server-bus ethernet elan1
> lane client ethernet
> no cdp enable
>!
>router ospf 5
> network 0.0.0.0 255.255.255.255 area 0
>!
>no ip classless
>!
>!
>line con 0
>line aux 0
>line vty 0 4
> login
>!
>end
>
>LS1010#sh run
>Building configuration...
>
>Current configuration:
>!
>version 11.1
>no service pad
>service udp-small-servers
>service tcp-small-servers
>!
>hostname LS1010
>!
>!
>atm lecs-address 47.0091.8100.0000.0061.3e5b.6c01.0060.5c5d.d03c.00
>atm address 47.0091.8100.0000.0061.3e5b.6c01.0061.3e5b.6c01.00
>!
>interface ATM0/0/0
> no keepalive
>!
>interface ATM0/0/1
> no keepalive
>!
>interface ATM0/0/2
> no keepalive
>!
>interface ATM0/0/3
> no keepalive
>!
>interface ATM0/1/0
> no keepalive
>!
>interface ATM0/1/1
> no keepalive
>!
>interface ATM0/1/2
> no keepalive
>!
>interface ATM0/1/3
> no keepalive
>!
>interface ATM1/0/0
> no keepalive
>!
>interface ATM1/0/1
> no keepalive
>!
>interface ATM1/0/2
> no keepalive
>!
>interface ATM1/0/3
> no keepalive
>!
>interface ATM1/1/0
> no keepalive
>!
>interface ATM1/1/1
> no keepalive
>!
>interface ATM1/1/2
> no keepalive
>!
>interface ATM1/1/3
> no keepalive
>!
>interface ATM2/0/0
> no ip address
> no keepalive
> atm maxvp-number 0
>!
>interface Ethernet2/0/0
> no ip address
>!
>interface ATM3/0/0
> no keepalive
>!
>interface ATM3/0/1
> no keepalive
>!
>interface ATM3/0/2
> no keepalive
>!
>interface ATM3/0/3
> no keepalive
>!
>interface ATM3/1/0
> no keepalive
>!
>interface ATM3/1/1
> no keepalive
>!
>interface ATM3/1/2
> no keepalive
>!
>interface ATM3/1/3
> no keepalive
>!
>no ip classless
>!
>line con 0
>line aux 0
>line vty 0 4
> login
>!
>end
>
>LS1010#sh lane def
>interface ATM2/0/0:
>LANE Client: 47.00918100000000613E5B6C01.00613E5B6C02.**
>note: ** is the subinterface number byte in hex
>
>atm1#sh lane clie
>LE Client ATM0.1 ELAN name: elan1 Admin: up State: initialState
>Client ID: unassigned Next join attempt in 65 seconds
>Join Attempt: 536
>Last Fail Reason: Control Direct VC being released
>HW Address: 0000.0c14.aed9 Type: ethernet Max Frame Size:
>1516
>ATM Address: 47.00918100000000613E5B6C01.00000C14AED9.01
>
> VCD rxFrames txFrames Type ATM Address
> 0 0 0 configure
>47.00918100000000613E5B6C01.00605C5DD03C.00
> 0 0 0 direct
>47.00918100000000613E5B6C01.00605C5DD03C.01
> 0 0 0 distribute
>00.000000000000000000000000.000000000000.00
> 0 0 0 send
>00.000000000000000000000000.000000000000.00
> 0 0 0 forward
>00.000000000000000000000000.000000000000.00
>
>atm1#sh run
>Building configuration...
>
>Current configuration:
>!
>version 11.2
>no service password-encryption
>no service udp-small-servers
>no service tcp-small-servers
>!
>hostname atm1
>!
>!
>!
>interface Loopback0
> ip address 195.5.100.1 255.255.255.0
>!
>interface Ethernet0
> ip address 167.214.35.1 255.255.255.0
> media-type 10BaseT
>!
>interface Ethernet1
> no ip address
> shutdown
>!
>interface ATM0
> no ip address
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
>!
>interface ATM0.1 multipoint
> ip address 195.5.6.100 255.255.255.0
> lane client ethernet elan1
> no cdp enable
>!
>router ospf 5
> network 0.0.0.0 255.255.255.255 area 0
>!
>no ip classless
>!
>!
>line con 0
>line aux 0
>line vty 0 4
> login
>!
>end
>
>atm1#sh lane clie
>LE Client ATM0.1 ELAN name: elan1 Admin: up State: initialState
>Client ID: unassigned Next join attempt in 65 seconds
>Join Attempt: 536
>Last Fail Reason: Control Direct VC being released
>HW Address: 0000.0c14.aed9 Type: ethernet Max Frame Size:
>1516
>ATM Address: 47.00918100000000613E5B6C01.00000C14AED9.01
>
> VCD rxFrames txFrames Type ATM Address
> 0 0 0 configure
>47.00918100000000613E5B6C01.00605C5DD03C.00
> 0 0 0 direct
>47.00918100000000613E5B6C01.00605C5DD03C.01
> 0 0 0 distribute
>00.000000000000000000000000.000000000000.00
> 0 0 0 send
>00.000000000000000000000000.000000000000.00
> 0 0 0 forward
>00.000000000000000000000000.000000000000.00
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:23 GMT-3