From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Thu Aug 10 2000 - 02:21:17 GMT-3
Without seeing your configs - not sure.
But, is the BRI interface address included in the rip network statement?
The passive will stop the updates going out the interface but won't stop the
route for the connected coming up, getting redistributed into OSPF and OSPF
sending an LSA for the newly learned route!
Simon
-----Original Message-----
From: Bill Dellamar [mailto:wdellamar@yahoo.com]
Sent: Thursday, August 10, 2000 11:47 AM
To: ccielab@groupstudy.com
Subject: ospf on demand-circuit
I am trying to implement ospf on-demand circuit.
R2 is connected to R3 serially and is area 0. R3's e0
is running rip. R3's bri is connected to r5's bri and
is area 5 running ospf on-demand.
It seems to work fine until I redistribute rip into
ospf. The link keeps coming back up as soon as it is
dropped. I know it's not an authenication problem
because it works until I redistribute rip. It's not
rip because I'm doing a passive-interface on bri0 for
the rip process.
Anybody ever seen this before?
Thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:23 GMT-3