From: Dave Genton (cisco_instructor@xxxxxxxxxx)
Date: Mon Aug 07 2000 - 14:26:36 GMT-3
It's not even supported unless it is a 7000 or 7500 series router.
Dave
----- Original Message -----
From: "Kenny Sallee" <mischa@worldshare.net>
To: "Roger Wang" <rwang@genuity.net>; <ccielab@groupstudy.com>
Sent: Monday, August 07, 2000 1:04 PM
Subject: Re: HSRP and DecNet
> Did you try to manually set the MAC address for the HSRP group? Not sure
if
> it will work or not but that's what I would try:
>
> int fa0/0
> standby mac-address mmmm.mmmm.mmmm
>
> Kenny
>
>
> ----- Original Message -----
> From: "Roger Wang" <rwang@genuity.net>
> To: <ccielab@groupstudy.com>
> Sent: Monday, August 07, 2000 8:01 AM
> Subject: HSRP and DecNet
>
>
> > Hi, all,
> >
> > It does not appear that HSRP and DecNet work together (I tested in my
lab)
> > because DecNet modifies the MAC addresses of LAN interfaces and HSRP
also
> > does that with a virtual MAC address. Are there ways around it?
> >
> > Thanks,
> >
> > Rog
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:22 GMT-3