From: Kenneth Kriel (kkriel@xxxxxxxxxxxx)
Date: Mon Aug 07 2000 - 16:30:16 GMT-3
Gentleman, we have a problem !!
On my router :
interface ATM3/0
ip address 192.168.1.2 255.255.255.0
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
atm esi-address 000000000002.00
no atm ilmi-keepalive
atm arp-server self
map-list svcclip
ip 192.168.1.1 atm-nsap 47.00918100000000603E5CAA01.00603E5CAA01.00
broadcast
This is my config, can you spot the issue ?
R4#sh atm ilmi-sta
Interface : ATM3/0 Interface Type : Private UNI (User-side)
ILMI VCC : (0, 16) ILMI Keepalive : Disabled
ILMI State: UpAndNormal
Peer IP Addr: 192.168.1.1 Peer IF Name: ATM1/0/0
Peer MaxVPIbits: 8 Peer MaxVCIbits: 14
Active Prefix(s) :
47.0091.8100.0000.0060.3e5c.aa01
End-System Registered Address(s) :
47.0091.8100.0000.0060.3e5c.aa01.0000.0000.0002.00(Confirmed)
<<<<<<AND>>>>>>
R4#sh atm arp
Note that a '*' next to an IP address indicates an active call
IP Address TTL ATM Address
ATM3/0:
* 192.168.1.2 18:49 4700918100000000603e5caa0100000000000200
<<<<<AND>>>>>>
R4#sh atm map
Map list svcclip : PERMANENT
ip 192.168.1.1 maps to NSAP 47.00918100000000603E5CAA01.00603E5CAA01.00
, broadcast
Map list ATM3/0_ATM_ARP : DYNAMIC
arp maps to NSAP 47.00918100000000603E5CAA01.000000000002.00
, connection up, VC 124, VPI 0, VCI 33, ATM3/0
ip 192.168.1.2 maps to NSAP 47.00918100000000603E5CAA01.000000000002.00
, broadcast, connection up, VC 125, VPI 0, VCI 34, ATM3/0
It looks like all is fine !!!
I see my address is registered with the LS1010 and I would like to ping the
other end of the SVC - 192.168.1.1 but I always get encapsulation failed on
this router, with the debug ip packet command.
Can anyone tell me why ?
Thank you
Ken
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:22 GMT-3