From: damien (damien@xxxxxxxxxxx)
Date: Sun Aug 06 2000 - 14:23:09 GMT-3
I am assuming you have no sync enabled......you have no route to the
next hop, if sync was enabled the BGP route would not be installed in
the Route Table....its a bit hard without looking at the
configs..........
----- Original Message -----
From: John Conzone
To: ccielab
Sent: Friday, August 04, 2000 12:11 AM
Subject: Whats wrong with this picture (Sho ip BGP and Sho ip route)
Please take a look at the following "sho ip bgp" and "sho ip
route" and tell me what is wrong with this picture, and why this is
happening? According to page 149 of Halabi's book, this shouldn't be.
(Hint: R1 can't ping 137.20.20.1)
r1#sho ip bgp
BGP table version is 2, local router ID is 200.200.200.1
Status codes: s suppressed, d damped, h history, * valid, > best, i -
internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*>i192.168.60.0 137.20.20.1 20 100 0 1 i
r1#sho ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B -
BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS
inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 24.2.28.1 to network 0.0.0.0
C 200.200.200.0/24 is directly connected, Loopback0
B 192.168.60.0/24 [200/20] via 137.20.20.1, 00:05:08
172.168.0.0/24 is subnetted, 1 subnets
C 172.168.21.0 is directly connected, Serial0
24.0.0.0/24 is subnetted, 1 subnets
C 24.2.28.0 is directly connected, Ethernet0
C 192.168.17.0/24 is directly connected, Serial1
S* 0.0.0.0/0 [1/0] via 24.2.28.1
r1#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:21 GMT-3