From: Harbir Kohli (harbirk@xxxxxxxxxxxx)
Date: Sun Aug 06 2000 - 11:40:06 GMT-3
Hello
Need some help using route-map.
This is my routing table
>R 192.168.12.0/24 [120/1] via 10.33.25.2, 00:00:00, Serial1
[120/1] via 10.33.55.2, 00:00:23, Serial0
I would like to change this route-table so that all routes I learn from
10.33.25.2 I add a metric of 2, so that the rip route is preferable via
10.33.55.2.
I did the following:
access-list 1 permit 10.33.25.2
route-map ripfilter permit 10
match ip route-source 1
set metric 3
and
int serial 1
ip policy route-map ripfilter
It does not work why ?
This is my first try creating route-maps so it is probably something
basic that I am doing wrong.
Help me fix this
Thanks in advance
Harbir
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:21 GMT-3