From: aiqun hu (huaq@xxxxxxxxxxx)
Date: Fri Aug 04 2000 - 12:31:50 GMT-3
But how can I split one ISDN line with 2 BRI into two different ISDN line???
What does the physical connection look like? I got one ISDN line here.
Should I talk to the ISDN carrier to split it or I can do it just from my
site?
Thanks in advance
Rena
>From: "Eugene Nesterenko" <eenest@msn.com>
>Reply-To: "Eugene Nesterenko" <eenest@msn.com>
>To: <ccielab@groupstudy.com>
>Subject: RE: back-to-back BRI
>Date: Thu, 3 Aug 2000 09:04:12 +0400
>
> You need working ISDN line with S/T adapter - you need something
> that will understand/supply ISDN signalling.
> Then you can connect two your routers in parallel to the same S/T
> interface and then you'll be able to make
> calls from one to another. Of course the only possibility will be
> to use just one B-channel - you have only
> 2 on BRI.
>
> I used that sometime ago.
>
>
> Regards,
>
> Eugene
>
> ------------------------------------
> Eugene Nesterenko, CCIE #5283, CCNP+Security, CCDP, MCSE
> Fax/VoiceMail: +1 415 7043497
>
>
>
> >
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On
> > > Behalf Of Kenny Sallee
> > > Sent: Wednesday, August 02, 2000 11:51 PM
> > > To: Mark Lewis; ccielab@groupstudy.com
> > > Subject: Re: back-to-back BRI
> > >
> > >
> > > Actually if you cross 1,2,3 and 6 it will work :) Just kidding.
> > > I couldn't
> > > help it...
> > >
> > > ----- Original Message -----
> > > From: "Mark Lewis" <markl11@hotmail.com>
> > > To: <ccielab@groupstudy.com>
> > > Sent: Wednesday, August 02, 2000 10:09 AM
> > > Subject: Re: back-to-back BRI
> > >
> > >
> > > > Sorry, not possible! I wish it was!
> > > >
> > > >
> > > > >From: "Ola Aiyegbusi" <ola@compath.com>
> > > > >Reply-To: "Ola Aiyegbusi" <ola@compath.com>
> > > > >To: <ccielab@groupstudy.com>, <cisco-cert@cciecert.com>
> > > > >Subject: back-to-back BRI
> > > > >Date: Wed, 2 Aug 2000 12:43:06 -0400
> > > > >
> > > > >Can you connect two BRI or PRI interfaces back to back to
> > simulate ISDN
> > > or
> > > > >connect BRI to PRI directly? I don't have an ISDN simulator
> > > but have BRI
> > > > >and PRI interfaces on my routers
> > > > >
> > > > >Ola Aiyegbusi
> > > > >Network Engineer CCDP, CCNP (Voice Access Specialization)
> > > > >ComPath Inc.
> > > > >10201 Lee Hwy Suite 140 Fairfax VA 22030
> > > > >Phone: 703-383-9550 Ext. 122
> > > > >Pager: 1-888-857-5620
> > > > >Cell: 703-395-8808
> > > > >Fax: 703-383-1369
> > > > >Email: ola@compath.com
> > > > >Web: http://www.compath.com
> > > >
> > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:21 GMT-3