From: Kenneth Kriel (kkriel@xxxxxxxxxxxx)
Date: Fri Aug 04 2000 - 09:01:23 GMT-3
Guys,
I believe that this is normal for some or other reason, I would like someone
to confirm the fact that the DLSW Circuits will go down after a couple of
minutes of inactivity, and that there is nothing wrong with my configs.
My Configs as follows:
hostname R2
dlsw local-peer peer-id 10.1.1.2
dlsw remote-peer 0 tcp 10.1.1.4 lf 1500
dlsw bridge-group 20
!
interface Loopback0
ip address 10.1.1.2 255.255.255.255
!
interface Ethernet0/0
ip address 10.1.1.129 255.255.255.128
bridge-group 20
!
bridge 20 protocol ieee
hostname R4
!
source-bridge ring-group 10
dlsw local-peer peer-id 10.1.1.4
dlsw remote-peer 0 tcp 10.1.1.2 lf 1500
dlsw bridge-group 30
!
interface Loopback0
ip address 10.1.1.4 255.255.255.255
!
interface Ethernet0/0
ip address 10.1.1.81 255.255.255.240
bridge-group 30
!
interface TokenRing0/0
ip address 10.1.1.65 255.255.255.240
ring-speed 16
source-bridge 11 1 10
source-bridge spanning
!
bridge 30 protocol ieee
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
D. J. Jones
Sent: Thursday, August 03, 2000 3:28 AM
To: Kenneth Kriel; 'Ccielab
Subject: Re: DLSW
Mind sharing your config so we can look at it?
----- Original Message -----
From: "Kenneth Kriel" <kkriel@netscape.net>
To: "'Ccielab" <ccielab@groupstudy.com>
Sent: Wednesday, August 02, 2000 2:17 AM
Subject: DLSW
>
> Gentleman,
>
> Question about DLSW
>
> PCA -- Eth -- RtrA -- FR -- RtrB -- TR -- PCB
>
> My DLSW config works and I can browse from PCA to PCB but after a while
the
> DLSW circuit goes down, does anyone know how I can keep it up or how I can
> force it to come up from the router ?
>
> Thank you
>
> Ken
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:21 GMT-3