RE: back-to-back BRI

From: Eugene Nesterenko (eenest@xxxxxxx)
Date: Thu Aug 03 2000 - 02:04:12 GMT-3


   
 You need working ISDN line with S/T adapter - you need something
 that will understand/supply ISDN signalling.
 Then you can connect two your routers in parallel to the same S/T
 interface and then you'll be able to make
 calls from one to another. Of course the only possibility will be
 to use just one B-channel - you have only
 2 on BRI.

 I used that sometime ago.

 Regards,

          Eugene

 ------------------------------------
 Eugene Nesterenko, CCIE #5283, CCNP+Security, CCDP, MCSE
 Fax/VoiceMail: +1 415 7043497

>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On
> > Behalf Of Kenny Sallee
> > Sent: Wednesday, August 02, 2000 11:51 PM
> > To: Mark Lewis; ccielab@groupstudy.com
> > Subject: Re: back-to-back BRI
> >
> >
> > Actually if you cross 1,2,3 and 6 it will work :) Just kidding.
> > I couldn't
> > help it...
> >
> > ----- Original Message -----
> > From: "Mark Lewis" <markl11@hotmail.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Wednesday, August 02, 2000 10:09 AM
> > Subject: Re: back-to-back BRI
> >
> >
> > > Sorry, not possible! I wish it was!
> > >
> > >
> > > >From: "Ola Aiyegbusi" <ola@compath.com>
> > > >Reply-To: "Ola Aiyegbusi" <ola@compath.com>
> > > >To: <ccielab@groupstudy.com>, <cisco-cert@cciecert.com>
> > > >Subject: back-to-back BRI
> > > >Date: Wed, 2 Aug 2000 12:43:06 -0400
> > > >
> > > >Can you connect two BRI or PRI interfaces back to back to
> simulate ISDN
> > or
> > > >connect BRI to PRI directly? I don't have an ISDN simulator
> > but have BRI
> > > >and PRI interfaces on my routers
> > > >
> > > >Ola Aiyegbusi
> > > >Network Engineer CCDP, CCNP (Voice Access Specialization)
> > > >ComPath Inc.
> > > >10201 Lee Hwy Suite 140 Fairfax VA 22030
> > > >Phone: 703-383-9550 Ext. 122
> > > >Pager: 1-888-857-5620
> > > >Cell: 703-395-8808
> > > >Fax: 703-383-1369
> > > >Email: ola@compath.com
> > > >Web: http://www.compath.com
> > >
> > >



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:20 GMT-3