From: Earl Aboytes (earl@xxxxxxxxxxxx)
Date: Thu Aug 03 2000 - 01:28:40 GMT-3
I am running DLSW and that is why I have a bridge-group assigned.
RTRC does not have a lan interface configured
This is the only arrangement that I have tried with this lab.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Earl Aboytes
Senior Technical Conultant
GTE Managed Solutions
805-381-8817
earl.aboytes@telops.gte.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: John Galt Kupec [mailto:jkupec2@san.rr.com]
Sent: Wednesday, August 02, 2000 5:25 PM
To: Earl Aboytes
Cc: ccielab@groupstudy.com
Subject: Re: multicast sparse mode
Earl Aboytes wrote:
>
> I've got three routers connected via frame with one hub and two spokes.
> They are all running PIM Sparse mode on the cloud and the lan interfaces.
> When I ping from a spoke I get a reply from the other two serial nterfaces
> but not from the lan interfaces where I have placed the join statement.
My
> RP is at one of the spokes. Is this what I should be seeing?
>
> Any ideas?
>
In a perfect world, RTRA's E0 should be responding.
What about that bridge group on RTRA? Are you actually
bridging anywhere with this setup?
Why is the RP on a spoke? Put it at the hub and
see what happens. For the hell of it I would
make E0 sparse mode and not sparse-dense mode.
I like consistancy.
Is there a LAN interface configured for RTRC?
>From where have you tried pinging- both spokes?
Do you get the same behavior when pinging from each
spoke?
Have you first tried a simpler arrangement like:
RTRA is RP
RTRB/C LAN interfaces join 224.1.2.3
extended ping to 224.1.2.3 from RTRA E0
-- John Galt Kupec Mentor Technologies Group, Inc. jkupec@mentortech.com http://www.mentortech.com ----------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:20 GMT-3