From: Hank Leung (hank1979@xxxxxxxxxxx)
Date: Wed Aug 02 2000 - 16:23:23 GMT-3
Show source-bridge <interface> should give you the SRNs, BNs, and TRNs. If
you set two bridges with different ring numbers you will get an error. The
first one will be created, but the second one will give you an error.
Something like invalid ring number, mismatch or something..
>From: Ron.Fuller@3x.com
>Reply-To: Ron.Fuller@3x.com
>To: ccielab@groupstudy.com
>Subject: Ring Number
>Date: Wed, 2 Aug 2000 14:27:57 -0400
>
>When configuring SRB on a token ring interface in a production network, how
>can you tell what the ring number is? Are there any debugs that will show
>you this info? What would happen to the network if the same ring had two
>bridges on it that gave different ring numbers? I poked around on CCO for a
>bit, but didn't see anything obvious.
>
>I imagine that you could use a sniffer to read the RIF, but any other
>ideas.
>
>TIA
>Ron Fuller, CCIE #5851, CCDP, CCNP-ATM, CCNP-Security, MCNE
>3X Corporation
>rfuller@3x.com
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:20 GMT-3