From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Tue Aug 01 2000 - 23:19:29 GMT-3
Johnny,
In case you can't find anyting on "FREEK", try Frame Relay End-to-End
Keepalive or some variation. I'll look later if I have time, too busy to
even study for the lab... :-(
B.
On Tue, 1 Aug 2000, Andrew wrote:
> There is a feature called 'FREEK' that we had Cisco implement into an IOS
> release for us. This features uses keepalives on PVC's end to end. You
> might want to ask your Cisco NSA or Engineer about that.
>
> At 07:26 PM 8/1/00 -0400, you wrote:
> > Johnny, you won't see the near end as "down" on a frame circuit if the
> >far end is down so tracking won't work. The switch will still send LMI to
> >the near end and it will be up-up.
> >
> >----- Original Message -----
> >From: "Johnny Dedon" <jdedon@cohesive.com>
> >To: <ccielab@groupstudy.com>
> >Sent: Tuesday, August 01, 2000 6:26 PM
> >Subject: HSRP tracking of Frame ciruits
> >
> >
> > > Can anyone tell me how to track the status of a serial frame relay
> > > connection with hsrp setup on the lan connections. I want to failover my
> > > LAN connection if the far end of my primary router's frame connection is
> > > down.
> > >
> > > RTRC
> > > X |
> > > ------------------------------
> > > Frame Relay
> > > ------------------------------
> > > | |
> > > RTRA - hsrp - RTRB
> > > | |
> > > -------Ethernet-----------------
> > >
> > > Router A is primary and link at RTRC fails
> > >
> > >
> > > Johnny
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:20 GMT-3