From: Sreeram P Bandakavi (sbandaka@xxxxxxxxx)
Date: Tue Aug 01 2000 - 20:46:01 GMT-3
you might also want to add "standby preemt "and "standby priority " a
higher value than rtrB
Sreeram
-----Original Message-----
From: Sreeram P Bandakavi [mailto:sbandaka@cisco.com]
Sent: Tuesday, August 01, 2000 4:35 PM
To: Johnny Dedon; ccielab@groupstudy.com
Subject: RE: HSRP tracking of Frame ciruits
You can use
"standby track " command to track the FR interface or subinterface..
read more at
http://cco/univercd/cc/td/doc/cisintwk/ics/cs009.htm#xtocid277594
Sreeram
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Johnny Dedon
Sent: Tuesday, August 01, 2000 3:27 PM
To: ccielab@groupstudy.com
Subject: HSRP tracking of Frame ciruits
Can anyone tell me how to track the status of a serial frame relay
connection with hsrp setup on the lan connections. I want to failover my
LAN connection if the far end of my primary router's frame connection is
down.
RTRC
X |
------------------------------
Frame Relay
------------------------------
| |
RTRA - hsrp - RTRB
| |
-------Ethernet-----------------
Router A is primary and link at RTRC fails
Johnny
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:20 GMT-3