From: Feliz, Edgar (Edgar.Feliz@xxxxxxxx)
Date: Tue Aug 01 2000 - 13:52:19 GMT-3
Here is a sample config with the PVC configured on the main interface, and
the LEC, LES/BUS configured on sub-int.
I have the ILMI, and QSAAL PVCs configured on the main interface because of
the LANE, but you do not need them there for just PVC configuration.
interface ATM3/0 (this is the PVC configuration)
ip address 192.168.3.1 255.255.255.0
map-group caslow
atm pvc 1 0 300 aal5snap
atm pvc 2 0 16 ilmi
atm pvc 3 0 5 qsaal
no atm ilmi-keepalive
!
interface ATM3/0.1 multipoint (this is the CLIP configuration)
ip address 192.40.100.3 255.255.255.0
atm esi-address 333333333333.00
atm arp-server nsap 47.009181000000006083C58601.777777777777.00
!
interface ATM3/0.15 multipoint (this is the LANE configuration)
ip address 192.168.13.1 255.255.255.0
lane server-bus ethernet pod3
lane client ethernet pod3
Hope it helps
EF
-----Original Message-----
From: Riviere, Lee (CRTATL) [mailto:Lee.Riviere@concert.com]
Sent: Tuesday, August 01, 2000 12:28 PM
To: 'ccielab@groupstudy.com'
Subject: LANE and manual LES/BUS/LECS and LEC NSAP
Can anyone provide me with a proven solution to configuring LANE using
manually configured LEC/LECS/LES and BUS NSAP addresses and PVC not SVC I
have had trouble getting this to work in my training lab.
Thanks,
Lee
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote also confirms that this email message has been swept by
Antigen for the presence of computer viruses.
http://www.concert.com
**********************************************************************
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:20 GMT-3