From: Clifton Stewart (cliftonlstewart@xxxxxxxx)
Date: Mon Jul 31 2000 - 02:26:00 GMT-3
The problem is you are using basic-ni1 so you need to provide the LDN
also. It should be as follows....
port 1 0835866101 8358661
0835866301 8358663
port 2 0835866201 8358662
0835866401 8358664<--- These are your local numbers.
You can specify the switch type globally or on the bri interface. Let me
know if you need more assistance.
Clifton Stewart-CCNA, CCIE Candidate
"ะปดำน๓" wrote:
>
> Hi,all
> Now i get a ILS-2000 ISDN simulator,But I can't use it work. I download a ils
configration software.and I
> choose a configuration Name: NI-1 Basic Mode.
> int bri0
> isdn spid1 0835866201
> dialer map ip 1.1.1.1 name xxx broad 8358661
>
> then I connect ILS2000 S/T PORT1 ----------Router1's bri0
> ILS2000 S/T PORT2-----------Router2's bri0
>
> but it can't work.
> above spid1 number and DN number all is ILS Help's SPID and DN number.
> what's problem?
> xie cong gui
> e_mail cong-gui.xie@datacraft-asia.com
> xiecg@netease.com
> mobile phone:13602748095
> tel: (020)87303592 87763345
> fax: 87303593
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:59 GMT-3